goop
11-21-2003, 09:40 PM
#1
goop
how is it applied . I am gluing my servo to my chassis on my 12l3 and need help with how to glue it together.
11-21-2003, 09:59 PM
#2
just put a dab in the center of your servo.
Maker sure to hold in place with your fingers or weigh it down so it won't slide for atleast 30min
then you can just do check ups every 10min or so till it hardens.
give it a full day to cure
The last thing you want is the half dry glue to break
Maker sure to hold in place with your fingers or weigh it down so it won't slide for atleast 30min
then you can just do check ups every 10min or so till it hardens.
give it a full day to cure
The last thing you want is the half dry glue to break
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
