New Yokomo TC, the BD-5
#2582
I'd still rather get a 1.1mm drill bit though.
#2583
fo 1.1mm drill bits try a jeweller or a glasses shop , my girl friend is an opticiac and they use the verry small drill bits in the shop , thats where is got my last ones from
#2584
I ll try to find it locally first (hardware shops), if I cant get it I ll buy from ebay. Before that, I wonder if HB's or TRF's 3 hole 1.1mm piston can fit in the Yokomo shocks coz those 2 are available at my LHS.
#2585
Tech Elite
iTrader: (120)
#2586
The Tamiya TRF ones are a perfect fit, been using these in my BD for the past year.
#2591
Just finished building my BD5WR, I wonder why the left rear toe reads 4deg and the right reads 3.8deg? I m using the stock block which supposed to set it 3.5deg. I had the same problem with my TCX and solved it by swapping the uprights (its a known issue with HB anyway). Does Yokomo has the same issue?
#2592
If anyone is interested, I am selling my Yokomo BD 5 worlds car. I have the following options that come with it:
roche front spool
Spec - r Ecs front drive shafts
spec -r gear diff
worlds front one way
one way center pulley
direct drive center pulley
2 front a-arms
2 rear a-arms
8 center steering link
all option rear toe blocks
one complete set of Yokomo white springs
the optional front and rear inner hinge pin mounts.
Bomber white belts and stock belts
aluminum sway bar mounts
full set of optional(different link position) shock mount blocks.
Im asking 420.00 shipped to US lower 48 states.
PM me if you are interested.
I plan on putting it on RC tech for sale forum tomorrow when I get the electronics taken out of it but thought I would offer it here first.
roche front spool
Spec - r Ecs front drive shafts
spec -r gear diff
worlds front one way
one way center pulley
direct drive center pulley
2 front a-arms
2 rear a-arms
8 center steering link
all option rear toe blocks
one complete set of Yokomo white springs
the optional front and rear inner hinge pin mounts.
Bomber white belts and stock belts
aluminum sway bar mounts
full set of optional(different link position) shock mount blocks.
Im asking 420.00 shipped to US lower 48 states.
PM me if you are interested.
I plan on putting it on RC tech for sale forum tomorrow when I get the electronics taken out of it but thought I would offer it here first.
Last edited by fpart; 02-06-2011 at 10:25 AM.
#2593
Hi guys,
I'm looking forward for an alu anti roll bar mount [YOK-BD-412H]
and a Yokomo gear diff [YOK-BD-500GS]
but everythere I look these items are out of stock, do someone know where it is available please?
regards,
Nico'
I'm looking forward for an alu anti roll bar mount [YOK-BD-412H]
and a Yokomo gear diff [YOK-BD-500GS]
but everythere I look these items are out of stock, do someone know where it is available please?
regards,
Nico'