RAL

iTrader: (67)

I was talking about the second servo hole. Thicker or stiffer I'm not certain.

SammyZ

iTrader: (138)

This is the Zeppin chassis plate 2.25mm, much much more narrow than BD5W chassis plate, excellent fit & finish, $65usd shipped. Has 2 Servo mounting holes
and allows users to flip the belts in any direction. Best chassis plate hands down.

kschu

iTrader: (16)

look good tho...might get 1 to try up

RAL

iTrader: (67)

Petit RC guys! Anyway we can get Marek Cernư's setup from the last round of ETS? Winner for Pro-Stock class...

Yokomo_Ant3

iTrader: (29)

http://www.rc-mushroom.com/product_i...or-bd5-p-24271

Interesting

Besercoe

iTrader: (9)

I could have done with that at titc

kschu

iTrader: (16)

too bad, it's dont hv place for battery strap tape..

JordanC

iTrader: (8)

Hi Guys,

I got my BD5WXC kit but didn't get the 44.2 FF block. Does anyone know who has them in stock.

Cheers,
Jordan

kschu

iTrader: (16)

BD5WXI in stock now

wazee

Anybody knows if the bd5wx is somewhere in stock?

JordanC

iTrader: (8)

Hi KS,

Do you have any of the 44.2 blocks?

masterhit

iTrader: (16)

Mareks' setup from round 3 of the ETS is up on Yokomos Facebook page!

Mike

retro_ryan

Need to run a low FDR for 17.5t blinky near 4.0 on a original bd5 but struggling to find something to work because the motor mount screw is threw the spur gear,any ideas? Got a 96/37=5.189 but need something like a 88/44 but not sure i can access the screw.

RAL

iTrader: (67)

Nice!

RAL

iTrader: (67)

I run 17.5 and 13.5 blinky and never had an issue. I've used 88-92 spurs. 91 at the moment. 92/50 was what I ran on a med-large outdoor track.