HPI Cup Racer 1M
#2161
I am interested to see what everyones Cup Racer weights with everyones setup in full race trim ready to hit the track.
My weights 2lb 13.6oz or 1293g. Here is my setup:
Vehicle - Datsun 240Z
Motor - Murfdogg 17.5 Synergy
ESC - Tekin RS Pro
Servo - Savox 1251mg
Receiver - Spektrum SR3100
Transponder - AMB Transponder
Battery - Protek 2S 40C 4200mah http://www.amainhobbies.com/product_...-ROAR-Approved
My weights 2lb 13.6oz or 1293g. Here is my setup:
Vehicle - Datsun 240Z
Motor - Murfdogg 17.5 Synergy
ESC - Tekin RS Pro
Servo - Savox 1251mg
Receiver - Spektrum SR3100
Transponder - AMB Transponder
Battery - Protek 2S 40C 4200mah http://www.amainhobbies.com/product_...-ROAR-Approved
#2162
Tech Champion
iTrader: (30)
just get yourself the pro4 diff/bevel gear set, the inner ring that needs to be glued to the diff ring to hold the bearing, and the correct size bearing (forget off-hand)
i'd also grab a copy of the Pro4 manual from hpi's site
its a simple mod - just as long as you got the inner run that needs to be glued into the Pro4 diff gear, that's what baffled me for a couple of hours until I broke down and emailed someone who was familiar with the Pro4
#2163
My weights 1108g. Here is my setup:
Vehicle - datsun sunny
Motor - lrp x11 17.5
ESC - Tekin RS
Servo - ko pds2511
Receiver - ko kr210s
Transponder - AMB Transponder
Battery - speedpower 2S 40C 5300mah http://www.speedpowerrc.com/en/productDetails.asp?p=7
i m using exotek chassis with ti screws, changed to 64p gears
Vehicle - datsun sunny
Motor - lrp x11 17.5
ESC - Tekin RS
Servo - ko pds2511
Receiver - ko kr210s
Transponder - AMB Transponder
Battery - speedpower 2S 40C 5300mah http://www.speedpowerrc.com/en/productDetails.asp?p=7
i m using exotek chassis with ti screws, changed to 64p gears
Last edited by littlealex; 01-25-2011 at 01:40 PM.
#2164
Tech Elite
its actually pretty easy - but its the Pro4, not a Hot Bodies car i've done it on my cup racer..
just get yourself the pro4 diff/bevel gear set, the inner ring that needs to be glued to the diff ring to hold the bearing, and the correct size bearing (forget off-hand)
i'd also grab a copy of the Pro4 manual from hpi's site
its a simple mod - just as long as you got the inner run that needs to be glued into the Pro4 diff gear, that's what baffled me for a couple of hours until I broke down and emailed someone who was familiar with the Pro4
just get yourself the pro4 diff/bevel gear set, the inner ring that needs to be glued to the diff ring to hold the bearing, and the correct size bearing (forget off-hand)
i'd also grab a copy of the Pro4 manual from hpi's site
its a simple mod - just as long as you got the inner run that needs to be glued into the Pro4 diff gear, that's what baffled me for a couple of hours until I broke down and emailed someone who was familiar with the Pro4
Thanks for the info.
#2165
I spent time looking around for a set of wheels/tires that would compliment my Cup Racer. I ended up with these. They are Tamiya 60D Super Grips on HPI 5-spoke mini rims w/ Tamiya inserts. I think the rims look nice. The tires are about the same size as the stock tires. I like the tread, slick tires just don't appeal to me for parking lot running.
#2166
I spent time looking around for a set of wheels/tires that would compliment my Cup Racer. I ended up with these. They are Tamiya 60D Super Grips on HPI 5-spoke mini rims w/ Tamiya inserts. I think the rims look nice. The tires are about the same size as the stock tires. I like the tread, slick tires just don't appeal to me for parking lot running.
Are the rims you mounted the Tamiya tires on actual Cup Racer rims? Also, if you could, please provide part numbers. I am very interested in getting the Tamiya wheels and tires for a more "scale" look!
#2167
Tech Adept
iTrader: (3)
I spent time looking around for a set of wheels/tires that would compliment my Cup Racer. I ended up with these. They are Tamiya 60D Super Grips on HPI 5-spoke mini rims w/ Tamiya inserts. I think the rims look nice. The tires are about the same size as the stock tires. I like the tread, slick tires just don't appeal to me for parking lot running.
http://www.rcmart.com/catalog/rc-mch...l?cPath=35_898
#2168
Tech Rookie
love my cr
hey sup guys, congrats on the race wish there was a cr class around here, i found a track in san jose. they will let me race in the ameture class but it wont count, becouse smaller chassis they say i have the advantage.
so ive been hitting the local parkinglot with a couple of freinds.
but its practice. lol i got a new body hope u guys like.
one ? for anybody who has the hpi upgraded shoxs, r they worth it? and do u guys think i need sway bars, do they realy help. the car handles grate on carpet, but im only running a 19 turn driftmeister. so i dont have to much power, and it drift's wonderfully. but i only have a 15 yr old traxxs to compare it to. hope u guys can help. hope u like the pics
so ive been hitting the local parkinglot with a couple of freinds.
but its practice. lol i got a new body hope u guys like.
one ? for anybody who has the hpi upgraded shoxs, r they worth it? and do u guys think i need sway bars, do they realy help. the car handles grate on carpet, but im only running a 19 turn driftmeister. so i dont have to much power, and it drift's wonderfully. but i only have a 15 yr old traxxs to compare it to. hope u guys can help. hope u like the pics
#2169
Tech Rookie
#2170
Tech Rookie
#2171
Tech Rookie
#2172
Tech Rookie
#2173
Tech Rookie
by trhe way egus that beemer looks sik!!!!!
#2174
The wheels on my BMW Cup Racer:
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXM930
The tires:
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGJ03
The inserts:
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGJ06
Those wheels/tires/inserts work for me. I did not use the chassis spacer plate and I don't race so ...
e
edit: I like ordering domestic if possible. Tower and Amainhobbies have got me covered for surface RC. Check out 3D Hobbyshop for planes.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXM930
The tires:
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGJ03
The inserts:
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGJ06
Those wheels/tires/inserts work for me. I did not use the chassis spacer plate and I don't race so ...
e
edit: I like ordering domestic if possible. Tower and Amainhobbies have got me covered for surface RC. Check out 3D Hobbyshop for planes.
Last edited by egaus; 01-28-2011 at 11:11 PM.
#2175
by trhe way egus that beemer looks sik!!!!!
Last edited by egaus; 01-29-2011 at 10:57 AM.