HPI Cup Racer 1M
#1667
Has anybody used the Sweep tires and wheels with the CR? I hear the Atomic tires are great but I can't seem to find any spoked wheels for it. Our racing class is all about realism and we have to use spoked wheels.
#1669
Thanks Mike! I wish I checked this thread sooner before I dropped some cash for HPI S compounds..
#1670
Tech Elite
iTrader: (60)
Picked up my RSR CR last week, Also got the brake disk kit, alu. steering turn buckle, sway bar kit, drift tires.
This Thing is a BLAST!!!
Have a Tekin 13.5 RS combo in it, on a 2s lipo, and this lil sucker gets it.
When the turbo boost hits, its gone.
Altho, the Alu. axle cups from HR are a must.
Ill post better pics up tomorrow.
This Thing is a BLAST!!!
Have a Tekin 13.5 RS combo in it, on a 2s lipo, and this lil sucker gets it.
When the turbo boost hits, its gone.
Altho, the Alu. axle cups from HR are a must.
Ill post better pics up tomorrow.
#1671
Tech Champion
iTrader: (30)
basically, turbo is like a configurable 2nd gear on the speedo - its not the technical explanation of the function, but you get the idea
its been available since the v180something, perfected in v199, kicked up a notched in v200, and really put a hurting on things in v203
just read the thread, its way to complicated to explain and there are guys MUCH better equiped who can explain in it in there -- and i run for tekin
#1672
Pics of my CR.
Turns out i broke the out drive in the front gearbox (owner before me appears to broke one himself). Is this a common problem? I searched for an aluminum replacement and came out with nothing.
Turns out i broke the out drive in the front gearbox (owner before me appears to broke one himself). Is this a common problem? I searched for an aluminum replacement and came out with nothing.
#1673
Yes, the gearbox outdrive is a very weak point.
I bought another rear metal outdrive and fitted it on the front with the upright shocks.
Holding up fine.
I too dont understand why nobody makes an ally replacement for this part
I bought another rear metal outdrive and fitted it on the front with the upright shocks.
Holding up fine.
I too dont understand why nobody makes an ally replacement for this part
#1674
Daniel,
Your BRE 240Z looks better with the 225mm wheelbase as opposed to the 210mm.
Your BRE 240Z looks better with the 225mm wheelbase as opposed to the 210mm.
#1675
my CR innards.....
HPI, GPM, TAIS and Hot Racing hop ups
Last edited by 1555Racing; 05-15-2010 at 06:32 AM.
#1678
Tech Champion
iTrader: (15)
Hi guys,
Just few words to show you that HPI is working on a potential evolution of the current Cup Racer. I prefer to be clear once again: these pictures below only show a car project only (Atsushi Hara prototype actually), not a production kit.
Final Design/production/release date are to be decided, so just enjoy things as they are now !
Just few words to show you that HPI is working on a potential evolution of the current Cup Racer. I prefer to be clear once again: these pictures below only show a car project only (Atsushi Hara prototype actually), not a production kit.
Final Design/production/release date are to be decided, so just enjoy things as they are now !
Can you ask Atsushi if HPI will be making the front drive shaft cup in metal? Everyone has broken the stock plastic ones (the 3 teeth snaps off). I can't imagine his not being metal since he is running 13.5 with a SXX
Actually after looking at your pics, it does look like his are not stock. I hope HPI releases these asap if metal.
#1679
Tech Adept
I see what you mean, I should have a chance to see him today. Willl ask him about that.
Cheers.
Slide
Cheers.
Slide
#1680
Tech Adept
You guessed right, it's a steel cup. It seems to be a prototype part as well.