Tamiya TRF415
TRF 415 for sale.
If you are looking for that good carpet car, I have the 415 with all part, and 4mm lower deck for sale. $150 Take a look over in rc sale.
CTX D2, CELL MASTER, AND MUCH MUCH MORE.
CTX D2, CELL MASTER, AND MUCH MUCH MORE.
Has anyone run a TA05MS and 415 back to back? I am probably going to pick up a TRF415MSXX MRE (yeah its a mouth full) but I already have a TA05MS. I am very curious to see the handling differences.
Tech Addict
iTrader: (4)
Tech Addict
iTrader: (4)
are the white low friction belts stronger than the black ones?
Tech Addict
iTrader: (4)
also if i buy these:
http://www.rcmart.com/catalog/produc...ducts_id=23030
http://www.rcmart.com/catalog/produc...ducts_id=20782
would i be able to make a spool for my MSX? I have a one way in it now.....can i still use that pulley?
Cheers
http://www.rcmart.com/catalog/produc...ducts_id=23030
http://www.rcmart.com/catalog/produc...ducts_id=20782
would i be able to make a spool for my MSX? I have a one way in it now.....can i still use that pulley?
Cheers
Tech Champion
iTrader: (4)
well, had a reasonably good days racing yesterday. Car was fast, and had a really good balance.
Settled on a few choices for next weekend, and made a few tweaks to the setup to get the car working better on the Vtec27's (loosening up the rear mainly).
Didn't manage to try the locked one-way joints, I'll have to try them some other time. Given how well the car was going with the standard dual one-ways (lots of entry steering, but nice and stable), I didn't want to change loads before next weekend.
Still runing a setup very close to the one from last year's carpet wars, except for some slight changes to the shocks (still not settled on which combo to go for.. heavier or lighter oil), steering spacer, rear camber links, and rear toe blocks.
Now just need to get some new cells (4 packs of EP's are on their way..) and I'm all set!
Here's hoping for a good one for the coming weekend.
Regards
Ed
Settled on a few choices for next weekend, and made a few tweaks to the setup to get the car working better on the Vtec27's (loosening up the rear mainly).
Didn't manage to try the locked one-way joints, I'll have to try them some other time. Given how well the car was going with the standard dual one-ways (lots of entry steering, but nice and stable), I didn't want to change loads before next weekend.
Still runing a setup very close to the one from last year's carpet wars, except for some slight changes to the shocks (still not settled on which combo to go for.. heavier or lighter oil), steering spacer, rear camber links, and rear toe blocks.
Now just need to get some new cells (4 packs of EP's are on their way..) and I'm all set!
Here's hoping for a good one for the coming weekend.
Regards
Ed
Tech Addict
iTrader: (4)
also if i buy these:
http://www.rcmart.com/catalog/produc...ducts_id=23030
http://www.rcmart.com/catalog/produc...ducts_id=20782
would i be able to make a spool for my MSX? I have a one way in it now.....can i still use that pulley?
Cheers
http://www.rcmart.com/catalog/produc...ducts_id=23030
http://www.rcmart.com/catalog/produc...ducts_id=20782
would i be able to make a spool for my MSX? I have a one way in it now.....can i still use that pulley?
Cheers
Tamiya 9804267 TRF415MSX MRE Direct Coupling
Tamiya 9804268 TRF415MSX MRE Direct Cup
Tamiya 9805776 2x9.8mm Shaft
Tamiya 3454401 TRF415MSX MRE Direct Holder
Tech Addict
iTrader: (4)
whats the coupling for?
Tech Addict
iTrader: (4)
Tech Addict
iTrader: (4)
can i use my original oneway pulley with the spool?
cheers
cheers
Last edited by surrealmaterial; 10-08-2007 at 02:57 AM.
Tech Adept
hi guys
anyone useing the orion 4800 lipo in a msxx.it looks like you have to cut the lump in the rear metal part where the battery shape is.do you have to file or cut the cross piece aswell.
any pics would be great
anyone useing the orion 4800 lipo in a msxx.it looks like you have to cut the lump in the rear metal part where the battery shape is.do you have to file or cut the cross piece aswell.
any pics would be great
Tech Master
iTrader: (1)
you can't run the orion 4800 in the MSXX. There is a screwhole going through that part of the aluminum bulkhead that you should not grind off.
The only way to get it to fit is to buy the MSXX stick pack chassis conversion.
Tech Adept
ok thanks for the advice ill have a look at the convertion before i go out and buy lipos.
Tech Addict
iTrader: (4)