Tamiya TRF415
#5341
Tech Master
iTrader: (1)
droop settings!
Originally posted by TryHard
Depends on how you like the car to handle
I had been running #4 front and #5 rear on my car for a while, but I've now switched to #4 on both ends. thats measured with a yokomo gauge on the same point on the outer pins on the suspension arm
Basically if you need more front end into the turn, increase the amount of droop on the rear. If you need more front out of the turn, decrease the amount on the front (restricting weight transfer to the rear, reducing the rear grip).
HiH
Ed
Depends on how you like the car to handle
I had been running #4 front and #5 rear on my car for a while, but I've now switched to #4 on both ends. thats measured with a yokomo gauge on the same point on the outer pins on the suspension arm
Basically if you need more front end into the turn, increase the amount of droop on the rear. If you need more front out of the turn, decrease the amount on the front (restricting weight transfer to the rear, reducing the rear grip).
HiH
Ed
Right?
#5342
You can anodize titanium but the color will dull out if you get alcohol on it. Hardcore racing(if they are still around) makes anodized titanium parts.
#5344
Re: TRF 415 MS World Edition
Originally posted by maxepower
Is that the World Edition or is just the MS? I heard that it is only available in Japan. Hey, can Speedtech get these kits? Steve???
Is that the World Edition or is just the MS? I heard that it is only available in Japan. Hey, can Speedtech get these kits? Steve???
#5345
hi,
does anyone know where to get part no:- TA-53573 piston damper 3hole in the UK or the USA as shipment from hong kong is extortionate if your buying some thing small
thanks for your help in advance
J-P
does anyone know where to get part no:- TA-53573 piston damper 3hole in the UK or the USA as shipment from hong kong is extortionate if your buying some thing small
thanks for your help in advance
J-P
#5346
Originally posted by J-P
hi,
does anyone know where to get part no:- TA-53573 piston damper 3hole in the UK or the USA as shipment from hong kong is extortionate if your buying some thing small
thanks for your help in advance
J-P
hi,
does anyone know where to get part no:- TA-53573 piston damper 3hole in the UK or the USA as shipment from hong kong is extortionate if your buying some thing small
thanks for your help in advance
J-P
#5349
R/C Tech Elite Member
iTrader: (47)
Re: TRF 415 MS World Edition
Originally posted by maxepower
Is that the World Edition or is just the MS? I heard that it is only available in Japan. Hey, can Speedtech get these kits? Steve???
Is that the World Edition or is just the MS? I heard that it is only available in Japan. Hey, can Speedtech get these kits? Steve???
#5350
R/C Tech Elite Member
iTrader: (47)
Anodizing titanium is really easy, I believe blue takes 3 9 volt batteries, just hook the positive end up to the turnbuckle, and dip it along with the negitive end in some Lysol basin tub and tile cleaner. You can change the color of the titanium by changing how many batteries you use.
#5353
Tech Regular
Champ Hobbies
Randy,
Do you have a link for champ hobbies?
Do you have a link for champ hobbies?
#5355
Nice box on 415MS.. Poor Mazumi though, get a car named after him, only to have someone else's picture/car be featured on the box.