Tamiya TRF415
gear differential for msx
Can you show us the gear diff ? thank you for showing.
I think gear diff will last way longer than ball diff...... but I don't know the handling after using one ?
I think gear diff will last way longer than ball diff...... but I don't know the handling after using one ?
Here is what i made up for weight strap ( also still use tape on the lipo )
Car has perfect 50/50 balance left to right & front to rear .
Bar is a peice of 10x10 key steel & weights 150 Grams . ( there are no other weights on the car )
Thanks
Tech Rookie
Setup sheets
I have found a site where you can store setup sheets of your TRF415:
rc-setups.com
Before posting you have to sign-up.
rc-setups.com
Before posting you have to sign-up.
Tech Master
iTrader: (5)
Does anyone know where I may be able to purchase Tamiya part number 49436 lower deck for stick packs for the MSXX?
Thx
Thx
but how do you get the + into the battery ?? it is under the bulkhead
I still have to use 3M scotch tape to secure the battery in place, so the positive terminal doesn't move hitting bulkhead or belt pulley.
Why don't you fit the battery with the connectors pointing to the front of the car, the top deck shouldn't be in the way of the connector.
I have exactly the same lipo and I run it the same way around... Fits perfectly The + isn't under the bulkhead
looks nice
my only thought is that theres 150gr of weight "above" the lipo, so it might upset the C of G (but yeah, I know it's gotta go somewhere), but if it feels fine then great, nice one!
my only thought is that theres 150gr of weight "above" the lipo, so it might upset the C of G (but yeah, I know it's gotta go somewhere), but if it feels fine then great, nice one!
Tech Addict
iTrader: (1)
Guest
Looks like the bevel gear diffs on the TAO4S. Are there bevel gears in that thing?
Tech Addict
iTrader: (1)
the handling is very good just have to get the right oil for the track, i tend to use heavy oil for open tracks (1/8 scale) and 4000 for tighter tracks. it pays to have a couple of diffs if you run at a few tracks. NO maintenance (just add oil lol)and serpent are supposed to be bringing out a front gear diff as well.
I wouldn't go back near a ball diff. No shims needed (maybe a 1mm)
steven