"REEDY RACE 2009"
03-22-2009, 10:51 PM
#377
03-23-2009, 08:54 AM
#380
Wow,
What did I start Javier...A
Sorry about that. I was just typing so fast to get that posted before I had to open.
Thanks for the help on posting that.
Scotty
What did I start Javier...A
Sorry about that. I was just typing so fast to get that posted before I had to open.
Thanks for the help on posting that.
Scotty
03-23-2009, 11:35 AM
#382
Spec Tires?
Spec Tires?
03-23-2009, 11:36 AM
#383
03-23-2009, 04:18 PM
#385
Tech Rookie
How about some more rules for RCGT? Is the (handout) HPI body a spec body that must be used or can any body (within RCGT's very loose rules) be used?
03-23-2009, 05:30 PM
#386
Hello everyone,
Here are the rules we will be using for the RCGT Division:
-Any 1/10th scale 4WD Touring Car chassis.
-Any "realistic/scale" Touring Car/GT body, 190mm or 200mm (No "Race" bodies, Stratus, Mazda 6, Andy’s Accord, etc.)
-Bodies should represent models that are running or had been run in the Touring Car, GT2, GT1 classes in ALMS, LeMans, Speed Challenge etc., and we also encourage the use of authentic racing paint schemes-Kit Lexan wing (flat realistic wing if included) or Plastic realistic wing set(s) only (keeping in mind the spirit of realism of the class), no high downforce aftermarket wings allowed
-17.5 Brushless Motors only
-6 cell NiMH or 2 cell LiPo 7.2/7.4v battery limit.
-Use of styling accessories encouraged, such as mufflers, intercoolers, mirrors, wipers, etc.
-No IFS Bodies Allowed
-No HPI Escudo Bodies
-Minimum weight requirement of 1400 grams
-No one-ways allowed. Cars must have 4-wheel braking at all times
-Must use the handout, pre-mounted D-Compound X-Pattern tires which are mounted on 0 offset split 6 wheels
-Racers will be allowed to purchase one additional set of tires
-Practice: Racers may use their own wheel/HPI X Patter tires. Practice wheels/tires do not need to be teched.
-No Tampering with the wheels
-Tire additives are allowed
Concours:
Note, any wheels 26mm spoked wheel. " DO DISHED WHEELS" and any X-Pattern tire will be allowed for use on your
We are very excited for the addition of this Division and know it will add a lot of excitement to the event.
Thanks
Scotty
Here are the rules we will be using for the RCGT Division:
-Any 1/10th scale 4WD Touring Car chassis.
-Any "realistic/scale" Touring Car/GT body, 190mm or 200mm (No "Race" bodies, Stratus, Mazda 6, Andy’s Accord, etc.)
-Bodies should represent models that are running or had been run in the Touring Car, GT2, GT1 classes in ALMS, LeMans, Speed Challenge etc., and we also encourage the use of authentic racing paint schemes-Kit Lexan wing (flat realistic wing if included) or Plastic realistic wing set(s) only (keeping in mind the spirit of realism of the class), no high downforce aftermarket wings allowed
-17.5 Brushless Motors only
-6 cell NiMH or 2 cell LiPo 7.2/7.4v battery limit.
-Use of styling accessories encouraged, such as mufflers, intercoolers, mirrors, wipers, etc.
-No IFS Bodies Allowed
-No HPI Escudo Bodies
-Minimum weight requirement of 1400 grams
-No one-ways allowed. Cars must have 4-wheel braking at all times
-Must use the handout, pre-mounted D-Compound X-Pattern tires which are mounted on 0 offset split 6 wheels
-Racers will be allowed to purchase one additional set of tires
-Practice: Racers may use their own wheel/HPI X Patter tires. Practice wheels/tires do not need to be teched.
-No Tampering with the wheels
-Tire additives are allowed
Concours:
Note, any wheels 26mm spoked wheel. " DO DISHED WHEELS" and any X-Pattern tire will be allowed for use on your
We are very excited for the addition of this Division and know it will add a lot of excitement to the event.
Thanks
Scotty
If you read the whole post its tells you what you can and can not run
03-23-2009, 08:14 PM
#389
03-24-2009, 07:48 AM
#390
Tech Rookie
...Harsh just likes wearing spandex bike shorts.