Sanwa VS KO Propo servo
01-13-2009, 04:20 AM
#1
Sanwa VS KO Propo servo
Hi, could you tell me wich servo should i use in 1/10 touring car.
01-13-2009, 02:38 PM
#2
01-13-2009, 04:26 PM
#3
01-13-2009, 06:12 PM
#4
And one more
01-14-2009, 01:16 AM
#6
The servo is to fast heheh.
So why top drivers still using big servos... because the sponsor? but i see top drivers from Ko propo still using big servos and not the low profile.
Thanks.
So why top drivers still using big servos... because the sponsor? but i see top drivers from Ko propo still using big servos and not the low profile.
Thanks.
01-14-2009, 01:36 AM
#7
I have been running the Ko Propo 2413 - Low Profile servo in my Xray 009 for a month now and although i find it very fast i like it, Most transmitters have the Servo speed anyway if you want to dial some speed out of it. Although realistically when you look at it its no faster than any of the bigger Ko servos
Cheers
Cheers
01-14-2009, 03:22 AM
#8
Yes, but is the big servos more precise or consistent in the 5 minuts run.
01-14-2009, 03:46 AM
#9
Yea i Know what you mean but by no means am i a Mark rienhard ect ect I am a fairly Quick Uk driver but do find this servo Fine in the car.
Nuno from the Xray forums?
Nuno from the Xray forums?
01-14-2009, 09:44 AM
#10
KO !!!!
01-14-2009, 10:11 AM
#12
Ok Thanks for the anwers.
Graham Kenny Yes i am Nuno Gancho from the xray forum.
Graham Kenny Yes i am Nuno Gancho from the xray forum.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
