bluephi1914

iTrader: (34)

+ 1

rx7ttlm

iTrader: (30)

The engineers were busy with other projects till about 2-3 weeks ago. Might start seeing new stuff in a month or two.. ???

dawgmeat

iTrader: (9)

Damm 1-2 months love my BMC but I gotta come out of my pockets and my that switch

paraletic

iTrader: (13)

Hey guys just lookin into gettin a laptop so I can do trackside adjustments etc
is there any issues with windows 7 running the software
also any problems or prefernce with CPU drivers ie: AMD, intel core etc

cheers

bluephi1914

iTrader: (34)

no issues. Im running windows 7 on my netbook and the KO software does just fine.

srp67

iTrader: (3)

it must be 32bit version? because it won`t run on mine that is 64bit...

Steve P.

paraletic

iTrader: (13)

Ok well I'm no computer expert etc
but 32 or 64 bit that's too do with the CPU isn't it?

What specs will I need too run it properly without any issues?
Ie intel core or intel i5 or amd seperon etc
1.6g or 2.2g CPU speeds etc
2gig ram 4gig ram 1/2gig ram etc

cheers - jus don't wanna get one that won't work right with it

Tha Skinny

iTrader: (8)

If I were wanting to make a profile that would be suited for World GT in an Associated 10r5 what would be the best way of starting out.There are some spots on my track where I would like the advance to kick in alot sooner.Is this possible with this speedo or no. Would I just have to make large drops in the frequencies to do this. I ran profiles for twelth scale and they seemed to be pretty good. It was really comparable to the v200 with the timing at 2( KO was still faster) We were trying to spec the class a little bit but decided that most of us want to be able to run them full tilt. I ended trying a profile from a Factory driver and Man what a difference in speed!!! Though my lap times were not any faster it really seems now I have alot more to use power wise, down the back straight it was Way fast and was aksked to turn it down as some were using GTB's. So anyways really just looking for some info on making my own profiles and was kinda wanting to share what I found out last night and tonight when.

zoomster

Hi Skinny,try the 10.5 I postered the other day,If so tell me what it was like,did not have a chance to try it .
Cya

Tha Skinny

iTrader: (8)

is this a 1/12 setup?

zoomster

Hi M8 yes its for 1/12th,for 10.5 Noval Ballistic ,the other I poster was also for a 1/12th but for 4.5 the power curve is sooth down low.From what I can tell the timing you set in the speedy covers the whole range of throttle movement,not like the Tekin where you can set it up in time intervals,but from what i understand is you have to have the load off the motor before the timing really comes it if you read what Ko says it state this,I would like some comments about what I just said to see what other people think,just to be able to understand brushless motors and the way they work.
Cya

paraletic

iTrader: (13)

K so I've got the bmc stock manager software on a disc which I had downloaded
I can open that no problems and see the graphs etc model 1-5 etc
I connect my speedy too the USB addaptor plug it into the laptop I found the com port - com3
but when I try too read all it says read failed
I've tried without a battery on speedy with a battery speedy switched on speedy off etc
no luck

am I missing something?
This is with windows 7 premium at 32bit if that helps

ps I'm using the black and white extentsion lead between the speedy wire and USB addaptor

radio_car_racer

iTrader: (1)

try the 3 wire red, black & white

no need to have the esc switched on or a battery connected

paraletic

iTrader: (13)

I tried without any leads just straight into addaptor
it lights up the led but still won't read regardless switch on or off just says read failed?????

Do I need too press and hold the mode button or something?

radio_car_racer

iTrader: (1)

no

have you installed the drivers for the usb adaptor?