where can you buy complete pinion sets?
#1
where can you buy complete pinion sets?
need some help.
thanks
thanks
#2
robertson racing have 48p sets,not sure about 64p
#3
What is "complete"? Could be 20 or more pinions. Most of which you will hardly ever use. My pitbox goes from 16 to 31 teeth in 48dp, and I don't run brushless which has people running much bigger pinions than that.
For that reason I don't believe anyone makes a "set". Just buy them as you need them.
For that reason I don't believe anyone makes a "set". Just buy them as you need them.
#5
What motor are you running? For a 17.5 brushless, with a 96 tooth spur, 40 to about 50 is a decent range (64 pitch).
#7
I wouldn't bother buying a set, just buy what you need else yourll be wasting alot of money like i did
#9
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
What is "complete"? Could be 20 or more pinions. Most of which you will hardly ever use. My pitbox goes from 16 to 31 teeth in 48dp, and I don't run brushless which has people running much bigger pinions than that.
For that reason I don't believe anyone makes a "set". Just buy them as you need them.
For that reason I don't believe anyone makes a "set". Just buy them as you need them.
Sosidge I have from 15-56 and I have used every one of them.. In 1/12, 1/10 and F1.... both brush and brushless...
Glitter, that and 10 cents will give you a dime....
bs6ef When you need one and the hobby shop is out of it..... Been there and done that...
#10
robinson racing has some sets from 15 to25 and from 16 to 26...hope this helps