Swampracer

iTrader: (72)

Hi guys, quick question.

I'm replacing some parts on my EVO to make it an EVO2.

The new chassis and brace, are people using any type of glue or adhesive between the brace and chassis. Like. JB weld product.

Thanks Greg G

trackout

No, I use the number of screws in the brace to adjust the flexibility for high or really low traction conditions. I'd lose that option if the AM33-5 brace was glued to the chassis.

Cadman1981

iTrader: (1)

Can anyone confirm if there is a revA and revB of the AT04-2 drive shaft?

trackout

This is what mine looks like:

trackout

Anyone have a good EVO2 setup sheet for VERY low traction carpet with the std springs on Sorex 28s?

Ted Su(TW)

Hi guys,

I'm about to pick up my EVO II kit tomorrow. This is my first A700 and I will be running modified on a medium sized asphalt track.

Which spare parts I should have ready in my pit bag, and which parts need to be replaced with stronger modified parts?


Thank you for your time.


Ted

Shock Tower

Is anyone of you Awesomatix owners, driving an LRP works flow 17.5 boosted ?

I have en EVO and have tried to get a surgestion to an stating setup in the LRP thread, but it seems that it is dead.

Therefore I wondered if any in here uses the esc, ang has experiance with the V5.4 firmware.

If yes, could you post your FDR, and settings, so I can mayby work from there and find my own settings.

Sorry again for chashing this thread with my setup question.

Cadman1981

iTrader: (1)

That's exactly the same one i have. I lowered my steering rack a little to clear it.

Cadman1981

iTrader: (1)

Hi Ted, 2-3 pages back there was an answer to this exact question! (i was looking for the same info!)

http://www.rctech.net/forum/13801156-post7909.html

Ted Su(TW)

Thanks! Super excited now!

HawaiiBob

I have my a700evo for sale. It was my IIC car but wasn't run. I have since put the carbon chassis on and run it one race day. I have many parts and brand new aluminum chassis. I will take pictures later this evening is anyone is interested. (pm for price or make offer)

Dan

iTrader: (75)

Where else can you buy Awesomatix parts in the states besides Awesomatix Shop USA and Apex RC?

I've been having to order things from both but things go out of stock often.

OVA

iTrader: (86)

I'll buy the Alum Chassis from you. Let me know please PM back..Thanks

cmunro

iTrader: (12)

I am in the market for a aluminum chassis aswell , pm me with what you have

malkiy

iTrader: (10)

You can order direct from Oleg. http://www.awesomatix.com/

Every order thru Oleg has taken about 1 week. I live in the Seattle area.