Originally posted by RC Old Man
Hi all, I Need a setup for D1 3mm on foams indoor carpet.
About 9.0 sec lap times.
heres what I ran at my local track I was turning mid to low 9's:
shocks inner on bottom middle on top
camber link lower inner
Jaco orange purple
Tq tire additive 1/4 to 1/2 on tire
losi rear hubs
Shocks outer on bottom middle on top
rear hubs in middle
camber link inner lower inner on hub
Ride height 4.5 mm Droop stock settings as in manual
Hope this helps you out