RC10L3 Brushless Motor Suggestions
#1
RC10L3 Brushless Motor Suggestions
I just bought a used RC10L3 and wanted some feed back as to what brusless motor/Esc I should go with. Cost is not an issue but I would like it to run on 2-3 cell lipos. I know the mamba fits that criteria. Other suggestions would be helpfull. Thanks.
Last edited by jaminit; 10-06-2008 at 11:50 AM. Reason: spelling
#2
Tech Elite
iTrader: (9)
What type of surface or track do you plan to run it on?
RACE or just BASHING around?
Oval L3 or the L3 'touring' on road car?
You'll find power to weight, etc. Pan cars are hard to drive with TOO much power stuffed in them, especially if you just plan to bash around.
These require a good grippy, clean surface.
We use just 2 cell Lipos with the SLOWEST Novak brushless motors (on a large track) and run over 50 MPH. With the 17.5 motors we're close to 60, and with 10.5's closer to 65.
A "faster" motor on a high bite track will be QUICK (if you can get it to get traction)
RACE or just BASHING around?
Oval L3 or the L3 'touring' on road car?
You'll find power to weight, etc. Pan cars are hard to drive with TOO much power stuffed in them, especially if you just plan to bash around.
These require a good grippy, clean surface.
We use just 2 cell Lipos with the SLOWEST Novak brushless motors (on a large track) and run over 50 MPH. With the 17.5 motors we're close to 60, and with 10.5's closer to 65.
A "faster" motor on a high bite track will be QUICK (if you can get it to get traction)
#3
A Mamba 5700 would probably be your best bet.
#4
if you are going for speed i would get a tekin rs pro with a novak 3.5r motor i never like sensorless systems like the mambas
#5
What is wrong with sensorless systems? I was thinking of buying a Sidewinder with a 5700kv motor for my RC10L3.
#6
Its preference