XRAY T2’009
#1276
Tech Master
iTrader: (37)
I run outdoors/asphalt/rubber with 4.0t/4.5t motors.
To date, the lipos have not moved or come out of the car (even after some BIG crashes).
#1277
Tech Master
iTrader: (37)
Yes, they received a shipment recently. Matt seems very reasonable and I believe that a kit order has been placed and will arrive shortly.
(I am not affiliated with CMC in any way.....just my personal dealing with Matt and CMC)
#1280
I too have the SMC 5200 lipos and the xray lipo weight kit. The lipo does not fit with the 2 'L' pieces install. I only run the 2 x 30gram centre weights and tape the battery in.
I run outdoors/asphalt/rubber with 4.0t/4.5t motors.
To date, the lipos have not moved or come out of the car (even after some BIG crashes).
I run outdoors/asphalt/rubber with 4.0t/4.5t motors.
To date, the lipos have not moved or come out of the car (even after some BIG crashes).
#1282
Best to give him a call. He is really good he will do a lot more than most people to help you find what you need.
I know the frustration about not being able to get spares and I'm sure Matt and hobby shops feel the same way.
#1283
if a SMC battery has a Length: 138.5mm (says the stormer website, way too cold out side to the garage and check) what length battery "would" fit in? Sorry for all the questions just don't want to throw away US$40 on something that wont work.
#1284
Tech Master
iTrader: (37)
e-mail isn't the best way to contact Matt, he will reply to you but it will take like 2 weeks.
Best to give him a call. He is really good he will do a lot more than most people to help you find what you need.
I know the frustration about not being able to get spares and I'm sure Matt and hobby shops feel the same way.
Best to give him a call. He is really good he will do a lot more than most people to help you find what you need.
I know the frustration about not being able to get spares and I'm sure Matt and hobby shops feel the same way.
So if you would like it to fit within the 'L' pieces, you would need to shave/dremel approx 0.6mm per 'L' piece to get the SMC lipo to fit with causing any 'tweak' from a tight/snug fit.
I was not a fan of shaving the 'L' pieces.
Hope this helps.
#1285
that's best answer to my question that i could have ever hoped for, thanks very much.
I will also agree with Matt's service being excellent. (maybe i got unlucky with the e-mail).
I understand why you didn't want to shave the L's. Looking and pictures the thread is already close to the edge.
I will also agree with Matt's service being excellent. (maybe i got unlucky with the e-mail).
I understand why you didn't want to shave the L's. Looking and pictures the thread is already close to the edge.
#1287
T2'009 09 Spec arrived
#1289
my smc 5200 cmax fits in just fine.