tomkelley

I've seen the CEFX logo on Josh's car, but could someone please enlighten me, what is CEFX?

RBLove

iTrader: (90)

Cyrul Engineering FX.

Bobby Flack

Rob Love is my HERO

RBLove

iTrader: (90)

Blah blah blah...........................


Mr. B Flack laying it down modified style last weekend. Car was dialed Bobby. Let'em have it at the Champs.........

BTW. U R MY HERO..................

ROBORAT

iTrader: (7)

Josh: thanks for the info on the motors. oh, and congrats on your win last weekend. Trinity must be missing you already! hehehe ....

Josh Cyrul

iTrader: (1)

Sedan set-up from this past weekends Halloween Classic - Purple front springs, #2 pistions, 70wt oil, Copper rear springs, #2 pistions, 50wt oil, Camber links up and in on both towers. Outer shock location in the rear (arm & tower), inner location on the arm & tower in the front (rear tower on the front). 4 degrees castor (F-0 & F) with R and R+2-0 blocks in the rear. 5mm ride height front and rear. 5mm front droop and 6mm rear droop, standard front roll bar, no rear roll bar, standard TC3 hub carriers in the upper camber link, 2 degrees of camber front and rear, batteries forward.... I think that's it - let me know if I missed anything.....

UCHEATULOSE

josh 6 cell mod is again a class at the snow birds..mike thought about eliminating it this year..but thought better of the idea..fun watching you guys blast through the corners! what oval car will you be running in feb?

munrath

iTrader: (4)

Hey Josh,

I see you're using number 2 pistons rather then number 3. Is it because the track had tones of traction and therefore didn't need the extra steering, making the car easier to drive?

Thanks,
Mark

ChrisP

iTrader: (11)

Hi Josh,

Just curious if you ever make it out to Larry's Performance RC's for any of the club races? I keep hearing stories about what a great guy and how much of a speed demon you are from some of the locals here in Windsor.

I'm heading to Larry's in the near future and was just curious if there'd be a chance to see you in action?

If not I guess I'll have to make the trip to Cleveland

John Fontaine

iTrader: (2)

Josh - Just curious if you have a brush setup for a P-94 in a 1/12th car. Cutting the face down etc..

Thanks,
John

Frank Ulbrik

Josh, [email protected]
get that 6 cell ride ready, Lansing is having a warm up race some time in jan. I lost your e-mail so give me a shout.

Josh Cyrul

iTrader: (1)

UCHEATULOSE - Ahh, cool. The 6-cell class is always fun and exciting! As far as cars go.... We will have to wait and see...

Mark - I used #2's because that was what was in my car when I ran it last (the ROAR Outdoor Nats on rubber tires)... What can I say, I'm a little lazy sometimes....lol.... I will try #3 pistions here in the comming weeks before Cleveland and see how they run.

Windsorguy99 - I used to run at Larry's all the time but lately I've been really busy. Let me know when you are going to run there and I'll let you know if I can make it out there. I've wanted to run there but I just have been super busy!!

John - Cut the brush (off the sides) so it's the same width as the standard stand-up brushes. Also you can try a horizontal slot in the brush.....

Frank - You have mail!!

Bobby Flack

Did you sign those tires yet?

Aaron Bomia

Not yet, but I'll UPS red them to you today.

Greg Anthony

iTrader: (4)