1/10 R/C F1's...Pics, Discussions, Whatever...
Tech Elite
iTrader: (22)
Thanks for the lipo CPR. Needed that flashing pit lane red light to convince the judges.
Rear ride height is adjusted by the axle spacers (0, 1 and 2) and you can flip the 1 and 2 fir more adjustment. For the front, little you can do on the 101 to adjust other than trying to play with the aluminum spacers above and below the knuckles (if using the aluminum knuckles).
Panda
Rear ride height is adjusted by the axle spacers (0, 1 and 2) and you can flip the 1 and 2 fir more adjustment. For the front, little you can do on the 101 to adjust other than trying to play with the aluminum spacers above and below the knuckles (if using the aluminum knuckles).
Panda
And I apologize for not being clear - what are the target starting ride heights for asphalt?
Hi guys,I really want to know where I can buy that Led light panel from.
Apparently that diffuser is out of stock everywhere and on banzai site it said the panel is not a part of the diffuser.
Anyone know where I could find that panel ?
Thanks
Apparently that diffuser is out of stock everywhere and on banzai site it said the panel is not a part of the diffuser.
Anyone know where I could find that panel ?
Thanks
Tech Elite
iTrader: (11)
I saw the Peter Gabriel "Back to Front" concert last night in the theater (we saw him live a couple years back in Santa Barbara). When he played "Shock the Monkey" I thought of you.
And I apologize for not being clear - what are the target starting ride heights for asphalt?
And I apologize for not being clear - what are the target starting ride heights for asphalt?
Found another Panda shirt I ordered for the races. Appropriate for the RC track.
Panda
Tech Regular
iTrader: (7)
F1 gents, am selling my F104v2 shelf queen. You can find in classifieds (electronics included)
Hi folks.
Could someone help me choose a battery for my F113?! I'm new to this class and have no idea about a good relationship between power/weight.
My Motor/Esc setup is Speed Passion Reventon + 17.5T sensored motor
I was thinking about use 2200mAh 2S nanotechs (~120 grams) for heats of 6-7 min.
Is 2200mAh enough?
Could someone help me choose a battery for my F113?! I'm new to this class and have no idea about a good relationship between power/weight.
My Motor/Esc setup is Speed Passion Reventon + 17.5T sensored motor
I was thinking about use 2200mAh 2S nanotechs (~120 grams) for heats of 6-7 min.
Is 2200mAh enough?
Tech Elite
iTrader: (13)
Use a shorty.
Most are 4000mah and up and with the shorty you have the weight on the rear or can move the battry for perfect weight balance.
Regards Roy
Most are 4000mah and up and with the shorty you have the weight on the rear or can move the battry for perfect weight balance.
Regards Roy
Tech Master
It's nice to see the wide F1 car format isn't being abandoned:TRF101 W
Tech Champion
iTrader: (16)
Lotus R31 - Paintlab decals!
Hi guys,
Finally finish my paintlab's R31, pretty awesome decals!! Thanks to paintlab!
here's is my work
and i am running my experimental brushless+esc builtin :-)
more info here
Finally finish my paintlab's R31, pretty awesome decals!! Thanks to paintlab!
here's is my work
and i am running my experimental brushless+esc builtin :-)
more info here
Tech Addict
iTrader: (39)
Star wars F1 body ??
http://www.modellauto-shop.ch/Eigenb...0%20050115.JPG
Hi can someone please tell me which body this person used to recreate this F1?
Thanks
Hi can someone please tell me which body this person used to recreate this F1?
Thanks
Tech Adept
http://www.modellauto-shop.ch/Eigenb...0%20050115.JPG
Hi can someone please tell me which body this person used to recreate this F1?
Thanks
Hi can someone please tell me which body this person used to recreate this F1?
Thanks
Tech Adept
iTrader: (8)
Anyone looking for a F104 Pro V2 RTR chassis? Currently for sale for dirt cheap in classifieds.
http://www.rctech.net/forum/r-c-item...ro-v2-rtr.html
http://www.rctech.net/forum/r-c-item...ro-v2-rtr.html
Tech Fanatic
Hi guys,
Finally finish my paintlab's R31, pretty awesome decals!! Thanks to paintlab!
here's is my work
and i am running my experimental brushless+esc builtin :-)
more info here
Finally finish my paintlab's R31, pretty awesome decals!! Thanks to paintlab!
here's is my work
and i am running my experimental brushless+esc builtin :-)
more info here
Tech Elite
iTrader: (22)
We in Dirtville have a perfectly serviceable racetrack sprayed with a couple gallons of fruit punch concentrate.. Except for the dirt field that blows on it most of the time. And the slurry coat that comes off as we run on it.
My 101 is strapped, ready to do work, for about a lap and a half till the dust buildup starts. Tried buggy grip, tweek, lg2, paragon, fx2, wd40, and even tried simple green which last about five laps before the grit adheres to the tires and the spins just start coming.
Any suggestions? Most are running 571/572, but nobody is great.
My 101 is strapped, ready to do work, for about a lap and a half till the dust buildup starts. Tried buggy grip, tweek, lg2, paragon, fx2, wd40, and even tried simple green which last about five laps before the grit adheres to the tires and the spins just start coming.
Any suggestions? Most are running 571/572, but nobody is great.