1/10 R/C F1's...Pics, Discussions, Whatever...
#9106
#9107
Tech Fanatic
You can buy them from brad directly or here: http://www.tqrcracing.com/shop/produ....asp?p_id=5904
I've already been checking TQracing and F1paintlab to find the correct decals but i didn't find them on their websites. So i guess they are not available anymore.
I prefer the correct outcome of the body but as this is only a track body i don't care to much of it.
It looks already great
#9108
Tech Fanatic
#9109
#9110
#9111
Suspended
Hi Guys!
After a little more advice - And asking some silly questions.
Firstly, Im about to order my TRF101 from Brad - Is it worth getting the hop up screw set before I start putting it together, Or are the screws it comes with more than good enough?
Secondly - Im getting the REEDY Sonic Mach 2 21.5T motor - Do I need to be able to solder to get this all fitted? As I can't solder.
Anyone know of any guides for this?
Many Thanks!
Alex
After a little more advice - And asking some silly questions.
Firstly, Im about to order my TRF101 from Brad - Is it worth getting the hop up screw set before I start putting it together, Or are the screws it comes with more than good enough?
Secondly - Im getting the REEDY Sonic Mach 2 21.5T motor - Do I need to be able to solder to get this all fitted? As I can't solder.
Anyone know of any guides for this?
Many Thanks!
Alex
#9112
Tech Fanatic
Hi Guys!
After a little more advice - And asking some silly questions.
Firstly, Im about to order my TRF101 from Brad - Is it worth getting the hop up screw set before I start putting it together, Or are the screws it comes with more than good enough?
Secondly - Im getting the REEDY Sonic Mach 2 21.5T motor - Do I need to be able to solder to get this all fitted? As I can't solder.
Anyone know of any guides for this?
Many Thanks!
Alex
After a little more advice - And asking some silly questions.
Firstly, Im about to order my TRF101 from Brad - Is it worth getting the hop up screw set before I start putting it together, Or are the screws it comes with more than good enough?
Secondly - Im getting the REEDY Sonic Mach 2 21.5T motor - Do I need to be able to solder to get this all fitted? As I can't solder.
Anyone know of any guides for this?
Many Thanks!
Alex
The Reedy Sonic Mach 2 motors has solder tabs, so you need to solder the wires to the motor tabs.
#9113
Tech Master
iTrader: (2)
I figure most here don't venture down to the Texas region thread very often, so I figured I'd post this here too. It has F1 (the best class) content, and I guess it's appropriate to post in this thread as well.
It's the race from last weekend, Round 2 of 4 in the Texas Electric On-Road Series. We'll be running 2 carpet tracks and 2 asphalt tracks with 1 throwout.
Seriously great times! Enjoy.
It's the race from last weekend, Round 2 of 4 in the Texas Electric On-Road Series. We'll be running 2 carpet tracks and 2 asphalt tracks with 1 throwout.
Seriously great times! Enjoy.
+ YouTube Video | |
#9114
#9118
Tech Elite
iTrader: (24)
The reason both the Sauber and Williams decals were discontinued is because of licensing issues. I have been served cease and desist letters by both teams. I may be able to arrange licensing with Sauber but Williams is crazy greedy and I will unlikely be able to deal with them
Hopefully we don't have any more issues
Hopefully we don't have any more issues
#9119
I deleted my message as I posted it in the wrong forum
#9120
Tech Elite
The reason both the Sauber and Williams decals were discontinued is because of licensing issues. I have been served cease and desist letters by both teams. I may be able to arrange licensing with Sauber but Williams is crazy greedy and I will unlikely be able to deal with them
Hopefully we don't have any more issues
Hopefully we don't have any more issues