F103 Camber Modification
Materials - Carbon reinforced plastic front suspension.
Step 1 Disassemble front suspension.
Step 2 Cut the center posts out using either a hack saw blade or dreamel tool.
Step 3 Once the center posts are cut out, use a small file to make the surface flat.
Step 4 Take a body reamer or a small diameter file and remove some material from ONLY the lower arm kinpin holes. If you don't do this step, your suspension will bind at the lower kingpin hole when your suspension is compressed.
Step 5 Select the amount of spacers for the desired camber.
It took me only 5-10 minutes to do, and now I have adjustable camber from 0.0 to -2.5 degrees.
Hope this helps you out.
Oh, forgot to mention. This modification is quite popular over here in Japan. Most guys running F103's and 4's use this front suspension setup. Get on it and be the first in North America.