1/10 R/C F1's...Pics, Discussions, Whatever...
#5687
Tech Master
iTrader: (9)
as far as I've read, they are identical - just with the "TCS' added to the sidewalls...
I think I read - either in the TCS thread or the F104 thread - that the packaging even says something being pits...it wouldn't be the first time Tamiya licesnsed another manufacturer to make something they didn't have or didn't perform up to par (Spec-R gear diff for the 416x)
I think I read - either in the TCS thread or the F104 thread - that the packaging even says something being pits...it wouldn't be the first time Tamiya licesnsed another manufacturer to make something they didn't have or didn't perform up to par (Spec-R gear diff for the 416x)
#5688
Tech Elite
iTrader: (24)
We ran 575/577 in Toledo
I mounted up a 571/572 combo and ran them at MSI , although I hear that the 571/575 combination gives great grip and balance on carpet.
Lon and Ted have been testing the Pardus tires down there, and we ran them at the ROAR regional as the spec tire at the Gate. With them costing $25 for a set of 4 rims,tires,inserts they are a good cost effective alternative to the PITS
#5690
Tech Apprentice
iTrader: (4)
BP Shadow, which top plate are you using on those F104 builds?
I would like to add that the "Track Ready" packages you have up on your site are actually a good value considering that you would get such a nicely detailed body, and there is actually quite a bit of build time involved with building/detailing these cars.
I would like to add that the "Track Ready" packages you have up on your site are actually a good value considering that you would get such a nicely detailed body, and there is actually quite a bit of build time involved with building/detailing these cars.
#5691
Tech Elite
iTrader: (24)
BP Shadow, which top plate are you using on those F104 builds?
I would like to add that the "Track Ready" packages you have up on your site are actually a good value considering that you would get such a nicely detailed body, and there is actually quite a bit of build time involved with building/detailing these cars.
I would like to add that the "Track Ready" packages you have up on your site are actually a good value considering that you would get such a nicely detailed body, and there is actually quite a bit of build time involved with building/detailing these cars.
#5692
Tech Regular
Thank You for all those tips!
It looks like we use the same tactics...
BTW I'm sharing picture of my wide F104 car I'm building for our large outdoor track. I have recycled a few F104Pro parts, with wide front axle and Xceed F103 foams ...and there will be Ferrari 643 body - very simple car.
It looks like we use the same tactics...
BTW I'm sharing picture of my wide F104 car I'm building for our large outdoor track. I have recycled a few F104Pro parts, with wide front axle and Xceed F103 foams ...and there will be Ferrari 643 body - very simple car.
#5693
Lotus 98t decals
Can anyone tell me where to find Lotus 98t decals?
#5694
Tech Master
iTrader: (4)
Join Date: Mar 2009
Location: Tween a Rock & a Hard Place in Pa.
Posts: 1,279
Trader Rating: 4 (100%+)
any shops in the us have xceed f1 foam tires? A main only carries sedan foams
#5695
Ordered my Xceed's from RC Mushroom. Took a week with expedited shipping. Couldn't find a US vendor. If you do, let me know.
#5697
#5698
I need to finish the car first but references from the fellow racers are good. There should be less tirewear than Tamiya F104 foams...hope I will know more in a week.
#5699
Tech Regular
I do have the TRG front uprights, plastic spacer was in package with uprights and I have 4 Tamiya F104 spacers available. With TRG plastic spacer and one Tamiya silver spacer it looks OK but I will test it next weekend on the track.
I need to finish the car first but references from the fellow racers are good. There should be less tirewear than Tamiya F104 foams...hope I will know more in a week.
I need to finish the car first but references from the fellow racers are good. There should be less tirewear than Tamiya F104 foams...hope I will know more in a week.
#5700
Tech Regular