Tamiya TB-02
#2075
Tech Adept
iTrader: (22)
How about this spool? Is it new? I can't tell from the pic if the outdrives are both aluminum or if one is plastic.
TB-02 Spool on eBay
The only website I can find for Tech Racing is all in Japanese, so if anyone here can read it for info on this spool that would be very helpful.
Tech Racing
TB-02 Spool on eBay
The only website I can find for Tech Racing is all in Japanese, so if anyone here can read it for info on this spool that would be very helpful.
Tech Racing
Tamiya drift machine-made "TB-02D" for the spool.
Since its introduction, the tension around the scene of the drift-tech HAIENDODORIFUTOMASHIN "DT-1 Speed" is used in the joints of steel parts with high stiffness, lightweight aluminum body and the light weight and durability Achieving balance,
The new development is a hybrid of the spool. DT-1 Speed Performance and durability, "DT-1 Speed" is a proven.
In the rear, of course, can be used to the front to rear to use in a KIKKAKE make you better, to improve speed and power.
If you drift to the front for easy stance to stabilize and even beginners who can enjoy a relatively easy run to the drift is by design.
品番 TTBD010 No. TTBD010
定価 \2400 Price \ 2400
#2076
Tech Elite
iTrader: (26)
I love the TB-02, have two, and the only thing that's ever bugged me was the lack of an available spool. I've been using homemade ones and they only last so long. This looks like the perfect spool, with an aluminum center and hardened steel outdrives. I'm going to order a couple right away and I'll post details once they arrive.
#2079
Tech Elite
iTrader: (26)
I shot for a little higher (numerically) FDR of 4.37 and it meshes perfectly, so my calculations were sound and these other gearing combos should work.
All of the following numbers pertain to 64p gears (use the "hockey puck" spur adapter that came with the kit).
FDR 4.37:
- 74t spur, 44t pinion, motor mount position B.
- I got these from superiorhobbies.com. 44t pinion=RRP4344, 74t spur=XENG640074
- tested and meshes perfectly
FDR 4.28:
- 74t spur, 45t pinion, motor mount position C.
FDR 4.25:
- 72t spur, 44t pinion, motor mount position A.
- 72t spur may be hard to find, but PRS just started making them.
FDR 4.47:
- 74t spur, 43t pinion, motor mount position A/B.
- 3racing mount A/B position will probably work perfectly with this combo
FDR 4.58:
- 74t spur, 42t pinion, motor mount position A.
It wouldn't hurt to use the 3racing motor mount with any of these combos as it gives you finer mesh adjustment.
#2083
What are your thoughts or opionions on the topic of gearbox ratio's http://www.rctech.net/forum/electric...ox-ratios.html