Batteries
#16
do the 3000 and the 3300 have more punch than 2400
And which would you be better off getting 3000 or 3300 because dont 3300 need special care, and is that the same as 3000 or can u give them a bit of a bash around and there still good?
thanks Matt
And which would you be better off getting 3000 or 3300 because dont 3300 need special care, and is that the same as 3000 or can u give them a bit of a bash around and there still good?
thanks Matt
#17
Tech Adept
The newer 3300's can be abused more and still have good numbers.
#18
Tech Elite
iTrader: (4)
Dont shop from towers. Go to your LHS or direct to the matcher. Towers is overpriced on most things.
My LHS always has high numbered SMC cells in stock the other LHS has high end POLEPOSITION CELLS.
Best advise is get a nihm charger and buy cheaper stronger higher voltage cells from GP. 3300s
My LHS always has high numbered SMC cells in stock the other LHS has high end POLEPOSITION CELLS.
Best advise is get a nihm charger and buy cheaper stronger higher voltage cells from GP. 3300s
#19
Registered User
Thread Starter
#20
Registered User
Thread Starter
or would one of these be better http://www2.towerhobbies.com/cgi-bin...?&I=LXCZW0&P=7
http://www2.towerhobbies.com/cgi-bin...?&I=LXCZV9&P=7
Thanks
http://www2.towerhobbies.com/cgi-bin...?&I=LXCZV9&P=7
Thanks
#21
#22
ajg - If your really not interested in soldering, then the batt's in the last two links you posted should keep you doing ok at a club level. They probabely won't be as good (less punch) as matched packs from matchers but for convenience(if you still run tamiya connectors) then they should be ok.
#23
Registered User
Thread Starter
thanks fatdoggy!