Tamiya TB Evolution V MS
#241
Tech Lord
iTrader: (26)
tell Jeff i sent you.
http://www.speedtechrc.com/store/ebp...id=716&id=8082
#242
can you order the spool outdrives seperately? Or do I have to buy the complete spool kit?
Mine are worn after a couple of months only.
Mine are worn after a couple of months only.
#243
subscribing
#245
I didnt know tamiya made delrin cups, I assume they will fit the tb03 and evo5.
#246
#247
Tech Addict
iTrader: (26)
Short Reversible Suspension Set
Will the Short Reversible Suspension Set kit (part #54083) drop right into an Evo V (non-MS) and work fine with the 46mm swing shafts?
I got my Evo V used and it came with the "regular length" reversible suspension arms (appears to be the same as on my TA05R) and no stabilizer bars, so I need the short arms and stabilizer hardware anyways.
I broke my C-hubs today at the races, so now I have an excuse to upgrade to the 416 suspension pieces and bearings like the MS.
I got my Evo V used and it came with the "regular length" reversible suspension arms (appears to be the same as on my TA05R) and no stabilizer bars, so I need the short arms and stabilizer hardware anyways.
I broke my C-hubs today at the races, so now I have an excuse to upgrade to the 416 suspension pieces and bearings like the MS.
#248
Tech Lord
iTrader: (26)
Will the Short Reversible Suspension Set kit (part #54083) drop right into an Evo V (non-MS) and work fine with the 46mm swing shafts?
I got my Evo V used and it came with the "regular length" reversible suspension arms (appears to be the same as on my TA05R) and no stabilizer bars, so I need the short arms and stabilizer hardware anyways.
I broke my C-hubs today at the races, so now I have an excuse to upgrade to the 416 suspension pieces and bearings like the MS.
I got my Evo V used and it came with the "regular length" reversible suspension arms (appears to be the same as on my TA05R) and no stabilizer bars, so I need the short arms and stabilizer hardware anyways.
I broke my C-hubs today at the races, so now I have an excuse to upgrade to the 416 suspension pieces and bearings like the MS.
the short arms are 1mm shorter than the original reversible. so if you're using the stock suspension block set up on the evoV... the swing shafts will just sit deeper in the outdrives. just for clearance issues to make sure nothing binds..
#252
i have one as a shelf queen, i'm racing a tb-03r... too bad that there are no spares available from tamiya besides the reular evo 5 parts...
#255
This kit is currently TOP (temp out of production). It's leaning toward to discontinued.