Formula 1 Electric who makes em ??
#271
I'll tell you what I think. We need big-al on the F1 commitee to make sure everyone is correct on how the cars should look. Axle182 and Giogio on the history commitee. Marty to make them go like stink. And me to tell everyone how they did on raceday. Let the F1 society begin!
#272
Tech Master
iTrader: (3)
Ok Chad I have had some time to think about your car for the builders cup.
I think I have something Real Exotic in store for you I should be able to finish it this week if I am lucky!
This will be a one off production. because it is un-tested! pics will follow.
So if you want to try it let me know ok.
Last edited by Marty Peterson; 08-30-2008 at 01:32 PM.
#275
Ok Chad I have had some time to think about your car for the builders cup.
I think I have something Real Exotic in store for you I should be able to finish it this week if I am lucky!
This will be a one off production. because it is un-tested! pics will follow.
So if you want to try it let me know ok.
#276
#283
Tech Master
iTrader: (3)
Lightfoot.
I would go with one of these:
TRG
http://www.rc-trg.com/f103-01.html
http://www.rc-zen.com/index.html
Order here:
http://www.rc-champ.co.jp/Champ_Inte...onal_index.htm
or Email The Border:
http://www.the-border.com/home.php
Ebay:
http://search.stores.ebay.com/Jasons...173167QQsofpZ0
MLP Upgrade: MP 3/8
http://home.comcast.net/~martylee38/F1hub.htm
I would go with one of these:
TRG
http://www.rc-trg.com/f103-01.html
http://www.rc-zen.com/index.html
Order here:
http://www.rc-champ.co.jp/Champ_Inte...onal_index.htm
or Email The Border:
http://www.the-border.com/home.php
Ebay:
http://search.stores.ebay.com/Jasons...173167QQsofpZ0
MLP Upgrade: MP 3/8
http://home.comcast.net/~martylee38/F1hub.htm
Last edited by Marty Peterson; 09-01-2008 at 05:59 AM.
#284
Tech Rookie
Hi
I am thinking of buying a F103 RM. Very cool that tamiya re-realesed them. I have always wanted one.
Does anyone know if MLP have tire adapters available so i could use 1/10 pan car tires on F103? .I've red about some adapters at MLP's site, but didnt find much info.
best regards from Norway
I am thinking of buying a F103 RM. Very cool that tamiya re-realesed them. I have always wanted one.
Does anyone know if MLP have tire adapters available so i could use 1/10 pan car tires on F103? .I've red about some adapters at MLP's site, but didnt find much info.
best regards from Norway
#285
Tech Master
iTrader: (3)
The Tire Adapters on the MLP Web site are for pan cars to run rubber touring car wheels and tires or that is to say a 12mm hex hub wheel.
As for F103 to Pan car tires:
Well I have got a lot of emails on pan cars or F1 cars that run pan car tires they want to run Tamiya F103 Rubber.
People with F103's want to Run Pan Car tires.
So at this point and time we are looking into both.
You can read back in this thread and find where we have told you how to run pan car front foams and to drill out F103 bearing holders to except pan car bearings so one can install a pan car axle and hub setup.
Axle Kit:
Part #IRS 2133
Bearing Kit:
Part #IRS1260
http://www.teamirsrc.com/axles.html
So what ever is done it will need to be simple and easy and Cheap or they will not sell that is the biggest problem the cost of making something new!
I do think new hubs designed like a pan car hub but for the F103 Axle would be best but if there are new bearing plates made this will work good also.
Thanks
As for F103 to Pan car tires:
Well I have got a lot of emails on pan cars or F1 cars that run pan car tires they want to run Tamiya F103 Rubber.
People with F103's want to Run Pan Car tires.
So at this point and time we are looking into both.
You can read back in this thread and find where we have told you how to run pan car front foams and to drill out F103 bearing holders to except pan car bearings so one can install a pan car axle and hub setup.
Axle Kit:
Part #IRS 2133
Bearing Kit:
Part #IRS1260
http://www.teamirsrc.com/axles.html
So what ever is done it will need to be simple and easy and Cheap or they will not sell that is the biggest problem the cost of making something new!
I do think new hubs designed like a pan car hub but for the F103 Axle would be best but if there are new bearing plates made this will work good also.
Thanks
Last edited by Marty Peterson; 09-01-2008 at 09:30 AM.