Tekin RS ESC sensored
#9302
Ok I finally got the hotwire to work plugged it in now how do I get the new program on it to load on my esc
#9303
Tech Champion
iTrader: (208)
I am at the track with the 203 and I am finding this is going to be a strong learining curve. Any suggestions for TC 13.5? The start RPM does not seem to take my setting. When I go to calculate rpm a message says to set start rpm and I have already done that. Is there a way not to use this feature?
#9304
Tech Champion
iTrader: (208)
I am at the track with the 203 and I am finding this is going to be a strong learning curve. Any suggestions for TC 13.5? The start RPM does not seem to take my setting. When I go to calculate rpm a message says to set start rpm and I have already done that. Is there a way not to use this feature?
#9305
Tech Fanatic
iTrader: (108)
I am at the track with the 203 and I am finding this is going to be a strong learning curve. Any suggestions for TC 13.5? The start RPM does not seem to take my setting. When I go to calculate rpm a message says to set start rpm and I have already done that. Is there a way not to use this feature?
#9307
You need to set end rpm range first
Start here
profile 5
boost 50
turbo 10
delay .1 adjust if more or less is needed on straight
ramp 3
end rpm 7000-6000 (7000 for longer tracks and 6000 for shorter)
start 2400-2500ish
make sure to temp 2 minutes in no matter what
Start here
profile 5
boost 50
turbo 10
delay .1 adjust if more or less is needed on straight
ramp 3
end rpm 7000-6000 (7000 for longer tracks and 6000 for shorter)
start 2400-2500ish
make sure to temp 2 minutes in no matter what
#9309
Is the 203 software available yet ?
I downloaded Vegas3 yesterday but havent used it yet.
I downloaded Vegas3 yesterday but havent used it yet.
#9311
Tech Master
iTrader: (8)
I am at the track with the 203 and I am finding this is going to be a strong learning curve. Any suggestions for TC 13.5? The start RPM does not seem to take my setting. When I go to calculate rpm a message says to set start rpm and I have already done that. Is there a way not to use this feature?
#9312
Tech Fanatic
iTrader: (10)
Hi Guys 3rd times a charm hopefully I asked this question a few pages back and was hoping to get some feedback from Randy or someone else on here anyone?
What settings for my esc and motor+ FDR would you recommend for this application. Running in 13.5 superstock class 310 metre long track using rubber tyres, and with the fastest time in this class at the moment being a 21sec lap but with the new software I dont see that lasting long.
The straight is 60metres long btw.
Thanks in advance Cheers Dave
What settings for my esc and motor+ FDR would you recommend for this application. Running in 13.5 superstock class 310 metre long track using rubber tyres, and with the fastest time in this class at the moment being a 21sec lap but with the new software I dont see that lasting long.
The straight is 60metres long btw.
Thanks in advance Cheers Dave
Dave,
I am the Tekin driver for New Zealand.
What software are you planning on using? V200 or the new V203.
I will have my netbook at the international and can help you out with settings although I have not had a chance to try the new V203 yet. I am sure by next weekend there will be some good settings for it though.
Cheers
Darren
#9314