Tekin RS ESC sensored
Tech Regular
iTrader: (9)
Lol I'm just kidding. I you didn't post that I was gonna ask where to get it.
V203 has worked great for me. Very happy I choose tekin and the power is unbelievable compared to origional v181? it came with.
Thanks for the great CS.
Tech Master
iTrader: (5)
Join Date: Jul 2002
Location: A step closer to where I need to be a step further from where I was
Posts: 1,186
Trader Rating: 5 (100%+)
Does anyone know if the UBI machine can run Hotwire software? It is a Linux machine.
Here it is:
http://www.ubisurfer.com/html/The_device.htm
Here it is:
http://www.ubisurfer.com/html/The_device.htm
Tech Champion
iTrader: (30)
Does anyone know if the UBI machine can run Hotwire software? It is a Linux machine.
Here it is:
http://www.ubisurfer.com/html/The_device.htm
Here it is:
http://www.ubisurfer.com/html/The_device.htm
Does anyone know if the UBI machine can run Hotwire software? It is a Linux machine.
Here it is:
http://www.ubisurfer.com/html/The_device.htm
Here it is:
http://www.ubisurfer.com/html/The_device.htm
I suppose you could try the Wine Windows emulator on Linux (I have no idea if it would work) but by the time you have it sorted you might as well have bought a Windows netbook.
Trev
Tech Initiate
Hi Guys,
Right a question for all the Tekin boffins! I did my first meeting with my Tekin RS last night, very impressed its very very fast.
The only thing im not completely happy with is the amount of brakes, ive noticed that using turbo OR higher amounts of boost seems to give me a slight delay between being flat out and then braking. I know its a bad habbit but its something ive always done using Nosram/LRP speedos....Anyone have any ideas on what i could try or will i just have to use the radio?
Im using a Speedpassion V3 10.5, 100% brakes on the Tekin.
Thanks in advance!
Right a question for all the Tekin boffins! I did my first meeting with my Tekin RS last night, very impressed its very very fast.
The only thing im not completely happy with is the amount of brakes, ive noticed that using turbo OR higher amounts of boost seems to give me a slight delay between being flat out and then braking. I know its a bad habbit but its something ive always done using Nosram/LRP speedos....Anyone have any ideas on what i could try or will i just have to use the radio?
Im using a Speedpassion V3 10.5, 100% brakes on the Tekin.
Thanks in advance!
Tech Adept
iTrader: (3)
To gear up (heavier) or to add more timing
Hi. Have been running the latest incarnation for quite a while now but mainly on a small track. Tried to run on a larger track (abt 50 to 60 m straight) today and decided to add a bit more boost and more turbo (ramp 1). Thing is the car doesn't seem much faster than before.
Would like to know if I should add even more turbo or I should gear heavier.
Also if it is possible I might be over timing.
Motor is an SP V1.0 11.5T
Start rpm is about 3000
End rpm is 19000.
FDR 6.9.
Boost 48
Turbo 10
Delay 0.6
Temps are between 60 to 70ish Celcius.
Thanks in advance.
Would like to know if I should add even more turbo or I should gear heavier.
Also if it is possible I might be over timing.
Motor is an SP V1.0 11.5T
Start rpm is about 3000
End rpm is 19000.
FDR 6.9.
Boost 48
Turbo 10
Delay 0.6
Temps are between 60 to 70ish Celcius.
Thanks in advance.
Both.
Gear heavier first, add turbo later. Check temperatures at all times.
Gear heavier first, add turbo later. Check temperatures at all times.
Hi Guys,
Right a question for all the Tekin boffins! I did my first meeting with my Tekin RS last night, very impressed its very very fast.
The only thing im not completely happy with is the amount of brakes, ive noticed that using turbo OR higher amounts of boost seems to give me a slight delay between being flat out and then braking. I know its a bad habbit but its something ive always done using Nosram/LRP speedos....Anyone have any ideas on what i could try or will i just have to use the radio?
Im using a Speedpassion V3 10.5, 100% brakes on the Tekin.
Thanks in advance!
Right a question for all the Tekin boffins! I did my first meeting with my Tekin RS last night, very impressed its very very fast.
The only thing im not completely happy with is the amount of brakes, ive noticed that using turbo OR higher amounts of boost seems to give me a slight delay between being flat out and then braking. I know its a bad habbit but its something ive always done using Nosram/LRP speedos....Anyone have any ideas on what i could try or will i just have to use the radio?
Im using a Speedpassion V3 10.5, 100% brakes on the Tekin.
Thanks in advance!
I also found that a good quality radio makes a lot of diference when I changed from a Spektrum DX3 to a KO.
Tech Adept
You're joking, right?
Tech Adept