Tekin RS ESC sensored
06-24-2008, 10:09 PM
#496
wait like the rest of us!!! They say end of June!!! I had waited 4 months when the R1Pro to be released and available. LHS I bought it from(RSPro) they only had two left.,Still they have no inventory, two month ago!!! Also with Redline Sensorless Modified motor, waiting on!!! LHS are not to blame!! Just wait!!!! We all be lucky if it available the end of July!!!
06-25-2008, 05:49 PM
#498
06-26-2008, 01:55 PM
#499
Tech Adept
Everyone speaks of Rs Tekin but ... Where can I buy one?
06-26-2008, 02:02 PM
#500
A little birdy told me it wont be long before there is more 
06-26-2008, 03:01 PM
#501
The birdie says the same to me!!! The same with Redline modify sensored motors!!! Ask Marcos.J if you're anxious!!! First RS purchased 2 months ago, and still waiting!! Many online suppliers not taking pre-orders.
06-26-2008, 10:42 PM
#503
here it is it mounts very well.
ran it today for the 1st time with the Speedpassion 3.5 motor and after 5 minutes it came of the track with the motor at 134 degrees and the esc at 162 degrees. I should have my hotwire tomorow then i can play with the timing a little bit.
06-27-2008, 11:01 AM
#505
06-29-2008, 08:04 PM
#506
anyone looking for a RS pm me. I am going to run some open mod and I need to get a pro
Last edited by davepull; 06-30-2008 at 11:36 AM.
06-29-2008, 08:47 PM
#507
Well I know this forum is in the on-road section, but I wanted to let you all know that I ran my RS pro in 4wd mod today and it was killer
Ran it with a 5.5 duo motor and I had so much rip it was rediculous! After a 7 minute main my motor was only about 130 and the speed was only flashing 3 lights for heat, which is real low temp.. I was super impressed with the punch that it had, when running my R1 pro in 4wd mod with a sensorless motor, sometimes their would be a small amount of hesitation especially when the buggy rolled backwards, but with the RS it was 100% problem free! Dont get me wrong the R1 pro works great too! This speedo outdoes them all and with its small footprint it can be mounted virtually anywhere in any vehicle, all of the locals cant wait to get one, believe me its wellllllll worth the wait! Thanks for the geat products Tekin....
Damon
Ran it with a 5.5 duo motor and I had so much rip it was rediculous! After a 7 minute main my motor was only about 130 and the speed was only flashing 3 lights for heat, which is real low temp.. I was super impressed with the punch that it had, when running my R1 pro in 4wd mod with a sensorless motor, sometimes their would be a small amount of hesitation especially when the buggy rolled backwards, but with the RS it was 100% problem free! Dont get me wrong the R1 pro works great too! This speedo outdoes them all and with its small footprint it can be mounted virtually anywhere in any vehicle, all of the locals cant wait to get one, believe me its wellllllll worth the wait! Thanks for the geat products Tekin....Damon
06-30-2008, 12:20 PM
#508
I'm still waiting on my RSPro....
I have had the chance to play with someones elses RS with Hotwire.
Things that need to be addressed in Hotwire software.
Timing? 0~100 is that precentage, degrees or miliseconds? Ditch the precentage and go to degrees or miliseconds.
Neutral Width. Again, Ditch the 0~100% and go with degrees or miliseconds.
Push Control? Documentation on what this feature does would be great.
Throttle/break profiles, If you ever owned a Castle Product you would would expect more from the "Pro" Brands
Then add the same adjustiblity from throttle/break profiles to the Hybird timing. Users would be very happy to have be able to adjust the timing curve for the hybird function.
I'm not trying to downplay Tekin. I just want the RS series to be the Best and the software is holding back.
I have had the chance to play with someones elses RS with Hotwire.
Things that need to be addressed in Hotwire software.
Timing? 0~100 is that precentage, degrees or miliseconds? Ditch the precentage and go to degrees or miliseconds.
Neutral Width. Again, Ditch the 0~100% and go with degrees or miliseconds.
Push Control? Documentation on what this feature does would be great.
Throttle/break profiles, If you ever owned a Castle Product you would would expect more from the "Pro" Brands
Then add the same adjustiblity from throttle/break profiles to the Hybird timing. Users would be very happy to have be able to adjust the timing curve for the hybird function.
I'm not trying to downplay Tekin. I just want the RS series to be the Best and the software is holding back.
timing is actually very simple , i think i got it figured out
correct me Tekin if im wrong:
1%= .3 degrees
2%= .6 degress
every % = .3 degrees of timing
5%= 1.5
10%= 3 degrees
15%= 4.5 degrees
every 5% = 1.5 degrees
every 10%= 3 degrees
Ive ran mod 3.5 Speedpassion motor with 10% timing (3 degrees)geared in the mid 9's and it was very fast temps on the esc were in the 160 degrees motor about 134 track temperature was around 135 degrees with 93 degrees outdoor temperature.
With the Speedpassion 13.5 I ran just 12% timing geared in the low 4's and the esc was around 123 degrees motor at 167degrees (track and outdoor temps the same) motor was very fast at the end of the straight with plenty of rip out of the corner.
07-01-2008, 04:12 AM
#509
Tech Master
Is there also a decal sheet with the esc.?
I hate waiting so i hope that this week ik can order my 2 rs pro's.
I hate waiting so i hope that this week ik can order my 2 rs pro's.
