Tekin RS ESC sensored
Harry, I'm starting to understand that my start/end rpm was way off 5,000-20,000 to me my car seemed non-boosted and everyone else was boosted so I started adding more gear, when I did change to 4,747-13,000 for the main I didn't change my FDR and I was over geared. Tony told me my range was off.
Yeah, sorry about that, if I'd known you didn't have a profile worked out, I'd have given you some help.
Try a 6.3 FDR, 50 boost, 6k-16k RPM range, and come up slow on the turbo on a .4 delay, 1 or 2 ramp if you find you still need more top end. My car came off at 165* every run, without a lack of top end or corner exit speed compared to everyone else. That should get you in the ballpark power wise.
Try a 6.3 FDR, 50 boost, 6k-16k RPM range, and come up slow on the turbo on a .4 delay, 1 or 2 ramp if you find you still need more top end. My car came off at 165* every run, without a lack of top end or corner exit speed compared to everyone else. That should get you in the ballpark power wise.
Tech Elite
iTrader: (15)
Harry, I'm starting to understand that my start/end rpm was way off 5,000-20,000 to me my car seemed non-boosted and everyone else was boosted so I started adding more gear, when I did change to 4,747-13,000 for the main I didn't change my FDR and I was over geared. Tony told me my range was off.
I'm going to give boosted a little more time, I understand why blinky is becoming popular.
Glad you're going to work on it a bit longer. Once you finish dialing in a profile that suits how you drive and how you want the car to behave, you won't be hurting on speed anywhere, it comes back to handling. A little bit like nitro racing: car setup, power plant, car setup, power plant, car setup, done!
software
Simple question is there a software update for the rs systems coming out soon.
Please do not just ignore me again
Regards Groomie
Please do not just ignore me again
Regards Groomie
Tech Fanatic
If you are looking for something special that in your opinion will improve the RS, why don't you ask Tekin to fit it in their speedos, I am sure that if your idea is good they will look into it.
Tech Apprentice
iTrader: (12)
I'd like to have a customizable throttle curve. Can usually get the
'feel' I like with present options in conjunction with radio settings though.
That aside, would anyone care to share a boosted setup to suit a TC on asphalt please?
X-12 13.5 track is not enormous. TIA
'feel' I like with present options in conjunction with radio settings though.
That aside, would anyone care to share a boosted setup to suit a TC on asphalt please?
X-12 13.5 track is not enormous. TIA
Why always asking for a new software?? is the one we use now not good enough?
If you are looking for something special that in your opinion will improve the RS, why don't you ask Tekin to fit it in their speedos, I am sure that if your idea is good they will look into it.
If you are looking for something special that in your opinion will improve the RS, why don't you ask Tekin to fit it in their speedos, I am sure that if your idea is good they will look into it.
He was asking a simple question. Is tekin planning on releasing an update or introducing a new speedie.
Reason he asked again was no one gave him an answer..
Tech Fanatic
iTrader: (37)
Tech Adept
FDR: 6.5-7 [not 100% on this, test carefully]
End RPM: 22,000
Start RPM: 9,000
Boost: 40
Turbo: Max 10 [the car will be easier to drive and just as fast without Turbo if the lead-in to the straight isn't real fast, or the straight isn't real long, so only use in small increments, with lots of temp checks]
Turbo Ramp: 2
Turbo Delay: .4
Don't take this profile and run with it, you'll need to do quite a bit of testing and temperature checking. Start low on the Boost, and increase in increments of 10 if the temps are good and you need more speed. The X12 has a lot of torque, and likes to run warm, so if you reach a point where the temp is getting too high with the boost, you may want to gear up [lower FDR], a touch and try another test run.
If the acceleration is too smooth/slow, start reducing your END RPM in 1,000 RPM increments. Don't get greedy, there's only so much to gain from a tight RPM range. My lower limit would be 16,000 RPM, so there's a pretty good range to work with.
If the car is too snappy on corner exit, bring the START RPM down one choice on the list, should be 800-1,000 RPM spread between choices.
If you're trying to get more corner exit acceleration, reduce motor timing and/or raise the START RPM one choice on the list.
Again, check the motor temp frequently, make one change between runs, and slowly work towards the power band you want. Hopefully, it only takes a few test runs with the profile I would start with to get up to the 40 Boost [no turbo, set turbo LAST, after all other tweaks are to your liking], to get a decent motor temp after a 6min. run, and you can start adjusting from there.
Tech Fanatic
Ahh there we are the keyboard bandit. Always one. Instead of using sarcasm how about just answer the question. If you don't know the answer then don't answer.
He was asking a simple question. Is tekin planning on releasing an update or introducing a new speedie.
Reason he asked again was no one gave him an answer..
He was asking a simple question. Is tekin planning on releasing an update or introducing a new speedie.
Reason he asked again was no one gave him an answer..
Hence my answer, if you are not happy with the actual software, ask for something specific to add into the next one...
Tech Apprentice
iTrader: (12)
Thank you Harry, you are a champ.