Randy_Pike

iTrader: (6)

There is nothing new software wise coming for the RS line of esc's at this time.

20 SMOKE

iTrader: (103)

rack size

OZDC

iTrader: (16)

36 DD?

20 SMOKE

iTrader: (103)

Groomie

iTrader: (6)

Lol track size is 30m x 20m

M-Technic

iTrader: (15)

My suggestion for a Duo3:

50 boost
5,XXX start rpm
18,XXX end RPM
10-12 turbo
ramp 2
delay .20
1-2 notch advanced timing on the motor
6.0-6.5 FDR

That should be noticably faster than the setup you are using now.

Groomie

iTrader: (6)

20 smoke
Is this what you suggest too

littlealex

iTrader: (86)

any idea of fdr for redline 17.5 boosted in a mini touring car?

20 SMOKE

iTrader: (103)

thats fine,he and i were trying different setups at our region race

Groomie

iTrader: (6)

Thanks for the advice guys one more question what would you recommend for a 70x30m track one full length straight and the rest is fast infield

Regards Groomie

20 SMOKE

iTrader: (103)

ask M-Technic for his k-raceway setup,i dont remember what i helped him with and the end result

teeforb

iTrader: (94)

hey guys,

looking at team drivers for the rs pro. Nowhere it shows the timing in the speed controller. i have a dex410 on a 6.5 lrp motor. I'll be running sensored mode (not dual) and was wonder what's a good timing on the rs pro...

thx

olly986

As mentionned above racers in mod class use dual mode, no timing.

teeforb

iTrader: (94)

I'm following setup sheets on Tekin site. They are running sensored. They show boost and turbo settings, but the sheet does not show timing setups.

CCristo

iTrader: (56)

Timing advance only applies in dual mode. Most people set it to ~80 in case of a sensor wire failure, you will run in dual mode and still get some timing advance.

edit: To clarify

Boost - increased timing in sensored mode
Turbo - increased timing in sensored mode
Timing advance - increased timing in dual mode.