Tamiya TL-01 Forum
#61
Tech Fanatic
iTrader: (9)
zxt: I'm hoping to get my licence this summer, student's licence that is. Hopefully we could visit the track in pasig soon.
Newsreport: I just ran my ff02 in school today and i'm experiencing quite a lot of wobble in my rear tires. If you remember they're unpowered because it's ff. After a while, i found out that the wobble came from the wheels not the shaft...is this really possible?
I'm planning to convert my ff02 to a tl01 soon, hope i could get enough parts.
Can protoform bodies fit tl01's? I'm afraid that my servo location in my ff02 is too high.
Newsreport: I just ran my ff02 in school today and i'm experiencing quite a lot of wobble in my rear tires. If you remember they're unpowered because it's ff. After a while, i found out that the wobble came from the wheels not the shaft...is this really possible?
I'm planning to convert my ff02 to a tl01 soon, hope i could get enough parts.
Can protoform bodies fit tl01's? I'm afraid that my servo location in my ff02 is too high.
#62
pang pinoy ba talaga tl01? hehehe dami natin dto ah
#63
Tech Rookie
hey mailboxck..........
i heard u were a xavier student......... im a h2 student....... i own a Tl-01 with mods.........wanna race ur ff-02 with me? what type of body uv got? mines an altezza.........
i heard u were a xavier student......... im a h2 student....... i own a Tl-01 with mods.........wanna race ur ff-02 with me? what type of body uv got? mines an altezza.........
#64
this summer?
maybe you mean to say next summer...its 6 months away my friend...
medyo matagal tagal pa hihintayin natn nyan...and to thin k its only a student license....hehehe...another mon th or so for the regular drivers license
medyo matagal tagal pa hihintayin natn nyan...and to thin k its only a student license....hehehe...another mon th or so for the regular drivers license
#65
Tech Fanatic
iTrader: (9)
suicidal: hey what ya have in your tl01? my ff02 has: alum heat sink, tuned springs, oil filled shocks(mugen), kyosho slicks, alum hex hubs, adjustable upper links, stabilizer bars, titanium susp. shaft and full ball bearings.
I still havnt painted the body but it will be a metallic blue celica(new ver). What hop up you have in your auto?
Sama ka samin on sat. sa quadrangle. I'll tell you when we'll be there. Usually sat about 8-11 am but may interaction kami with poveda the whole day. Bad trip
We make our own track, hope you could help us building a better one. Anyway, what's your name and section? Do you have any classmates in the hobby? You're all welcome.
I still havnt painted the body but it will be a metallic blue celica(new ver). What hop up you have in your auto?
Sama ka samin on sat. sa quadrangle. I'll tell you when we'll be there. Usually sat about 8-11 am but may interaction kami with poveda the whole day. Bad trip
We make our own track, hope you could help us building a better one. Anyway, what's your name and section? Do you have any classmates in the hobby? You're all welcome.
#66
Tech Rookie
mine has aloy shocks, lightweight chassis, sealed type ball bearings, mantaray balldiffs, gtr universals, tl01 wide conversion kit, lrp v7.5 esc, trinity plutonium p-94 motor which i just bought, type a slicks... thats about it...... i also lowered the car to about 10mm of the ground.. i also removed the 4wd shaft
#67
Tech Initiate
I want a new TL01
My first car was a TL01 and i loved it, it had every hopup availebal not only from Tamiya but also Cross and GPM and Pentagon shocks. This was my first car and i sold it because the repairs where to high after a year racing. Im very sad now that i sell the car so i am now thinking to buy me a new TL01
#69
the long span suspension arms really make the tl-01 hug the ground better. i think this is the most essential hop-up you could buy for the tl-01, aside from the bearings and oil shocks to replace those darn friction shocks
#70
Tech Rookie
will yokomo aluminum shocks fit tl01 chassis????
#71
duh
Originally posted by suicidal
will yokomo aluminum shocks fit tl01 chassis????
will yokomo aluminum shocks fit tl01 chassis????
#72
Does anyone know of a cheap set of oil shocks to suit TL01???? somewhere around the $20-25 US?
#73
mailboxck, i cannot see why not. I have the 190mm 300M shell and it fits fine.....
#74
Tech Apprentice
Thread Starter
CVA Super Mini Shocks - 13 bucks for two
#75
Thanks.....
Forgot to mention....... i live in Australia. Any ideas on whether Tower Hobbies or someone who mail orders may have them?
Forgot to mention....... i live in Australia. Any ideas on whether Tower Hobbies or someone who mail orders may have them?