New TEAM WAVE racing brushless system
#107
Cant w8 to get one 50 for the indoor carpet season..TC.
Let us know when it will be ready for shipping.
Let us know when it will be ready for shipping.
#108
i think the drop power problem is cause by the setting hipoint at remote..last time i think my esc got problem..i ran with turbo on..the after a while the motor stop running..but after i recheck my remote then i set the 110 throttle hipoint..so after i set it back to 100..the problem solve..
but..still got one problem..lipo cut..it seem after 2 min then the car started to move slow..why?...the after disable it..the problem gone..i think that setting is not worth to turn in on...
my beginers opinion..
but..still got one problem..lipo cut..it seem after 2 min then the car started to move slow..why?...the after disable it..the problem gone..i think that setting is not worth to turn in on...
my beginers opinion..
#110
Would love to try an RB-30, but I think I will hold off until they fix the problem with memory loss (when turbo is enabled?) and that the LiPo cutoff works properly...
#111
Tech Regular
iTrader: (3)
Actually ive been testing it for a couple of weeks and it really is a nice speedy what you do is turn on the speedy with turbo enabled then when the red light comes on it cuts the throttle to a crawl, you then turn it off and back on and problem solved!! if you do this every time you turn it on with a fresh battery it is fine! the other thing is i would recommend you get a fan and wire it to the pos neg on the speedy which runs the fan at 7.2 volt or wateva the battery puts out! As i have found that on a hot day it will thermal my 10.5 at 2 minutes! Which brings me to my last point turn on the thermal control, cause it is not on from standard.... im not sure why....
#112
Actually ive been testing it for a couple of weeks and it really is a nice speedy what you do is turn on the speedy with turbo enabled then when the red light comes on it cuts the throttle to a crawl, you then turn it off and back on and problem solved!! if you do this every time you turn it on with a fresh battery it is fine! the other thing is i would recommend you get a fan and wire it to the pos neg on the speedy which runs the fan at 7.2 volt or wateva the battery puts out! As i have found that on a hot day it will thermal my 10.5 at 2 minutes! Which brings me to my last point turn on the thermal control, cause it is not on from standard.... im not sure why....
#113
Hi slakr,
The drop setting problem only appears on the sample unit, all production units have fixed the problem already. Once you try our speedo, you will throw your other ESC away
The drop setting problem only appears on the sample unit, all production units have fixed the problem already. Once you try our speedo, you will throw your other ESC away
#115
When the RB50 will be available? And what is this "turbo" function?
#116
Hi All,
RB50 will release this month, now printing manual and packaging box.
RB50 will release this month, now printing manual and packaging box.
#117
#120
Tech Master
iTrader: (73)
RB50
I live in Tampa Florida, and I know and race with your distributor here. I put in an order for this speed control and motor (6.5) but there is always a problem with the company shipping them out. Would I be better off just ordering them from the website. Any advice would be helpful.
thanks for your time
cliff