R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Thread Tools Search this Thread
Old 05-12-2009, 05:32 PM   #496
Tech Regular
Join Date: Dec 2008
Posts: 459
Trader Rating: 9 (100%+)

Originally Posted by busdriver View Post
I ran the 13.5 Hacker in the stock class at the Cactus Classis this year. I geared it 25/82 in a Losi xxxt-cr. It ran alright, I TQed 3 of the 4 rounds, was the only "stock" vehicle to run 15 laps & then blew out in 2 of the 3 A-mains to finish 2nd because I'm too nice. I'm pretty sure that was the gearing & it never ran hot. The outside temp was probably 90 degrees or so. Only got out motored once buy my cheating friend who posts on here as iamcornholio! J/K hope this helps!
Which speedo and profile were you using?
billythekid is offline   Reply With Quote
Old 05-13-2009, 09:52 AM   #497
Tech Elite
Skiddins's Avatar
Join Date: Feb 2006
Location: Windsor, UK
Posts: 4,483

Originally Posted by Skiddins View Post
Does the 10.5 come with a standard amount of timing from new?

The endbell looks a lot like the Novaks with the periodical indentation on it. But when the Novak's are new these indentations are evenly spaced from the solder tabs etc. On the Hacker its already twisted around quite along way?

I'll answer my own question

It woud appear that despite the position of the timing ring the motor had 30deg of timing as standard.

I have since been told that '0' timing from most manufactures is typically 30 deg.

This is 30deg;
Speed Passion

Xray T4'16, T4'14 (Wet Car)
Xray X12 2016
Xray X1'16
wlrc.co.uk (West London Racing Centre)
RD Disco
Skiddins is offline   Reply With Quote
Old 05-15-2009, 07:29 AM   #498
Tech Elite
hacker's Avatar
Join Date: Mar 2009
Location: Vic, Australia
Posts: 3,126
Trader Rating: 139 (100%+)

have not had a motor before that was so hard to adjust timing!

I thought at first the timing were not adjustable, however after carefully seperating the plastic ring from the can after wedging a knife in between, was it finally adjustable.
hacker is offline   Reply With Quote
Old 08-28-2009, 11:41 AM   #499
Tech Legend
Cain's Avatar
Join Date: May 2002
Location: West Fargo, North Dakota
Posts: 26,038
Trader Rating: 205 (100%+)

so what are the thoughts on the hacker 17.5 for 1/12?
< Durango DEX8, DESC410V2, DEX410V5>
< Team Associated RC10B6D>
Cain is online now   Reply With Quote
Old 08-28-2009, 01:52 PM   #500
Tech Master
yokemad's Avatar
Join Date: Apr 2007
Posts: 1,150

How about HACKER 13.5T fixed timing?
is it 0 fixed?
Thanx in advance
yokemad is offline   Reply With Quote
Old 08-30-2009, 04:45 AM   #501
Tech Master
mac853's Avatar
Join Date: Feb 2007
Location: Dirty place
Posts: 1,722

Could somebody tell me how many KVs rating in the Hacker 10.5T?

In fact in english site, it says it has 3080KV, like that 1 of Losi which his derived from the same factory.
But in the german site, it said it really has 3500KV.
Then please somebody tell me which 1 is real.
In fact i want to have a sensored motor to race in 3100 class in my site.

Best regards
mac853 is offline   Reply With Quote
Old 02-14-2010, 11:24 AM   #502
Tech Rookie
Join Date: Jan 2010
Location: new york
Posts: 1

Originally Posted by trickd122 View Post
I am new to electric however not new to racing. I currently have a Novak 10.5 b/c almost everyone here at my club runs Novak, Why I have no idea.
When I came across this thread I began thinking are these just numbers or are the Hacker motors really faster?

Novak 10.5
Watts: 280+

Hacker 10.5
Watts 400!
rpm 3000+

I'll be purchasing a NEW motor soon any info will be greatly appreciated

has any one done a chart like this with the 17.5 motor on the market?
rick840 is offline   Reply With Quote
Old 06-30-2010, 05:10 PM   #503
Tech Addict
Join Date: Oct 2005
Location: Northern NSW Australia
Posts: 734
Trader Rating: 1 (100%+)

I am looking at adding a 10.5 and a17.5 to my stable of motors.
I am currently running a MAMBA MAX PRO with LRP/Tekin and Speed Passion 2 10.5 and LRP and Speed Passion 2 17.5.
Looking at these 4 Motors combos

Hacker E40 - 10.5 -3500kv - 320 watts -25900 rpm
17.5 -2070kv - 210 watts - 15318rpm

Tekin 10.5 - 4500kv - 243 watts - 33300rpm
17.5 - 2500kv - 131 watts - 18500 rpm

LRP x12 10.5 - 3600kv - 306watts - 26640 rpm
17.5 - 2200kv - 183 watts - 16280rpm

Novak Balistic - 10.5 - 4200kv - 235watts - 31080rpm
17.5- 2200kv - 130watts - 16280rpm

Now in saying all of this the tracks that i run on are medium to large and technical to flowing So will the Hacker do the job.
Robitronic Avid / Avid V2
Tekin RS pro / Viper 10.5/MMP/6900

AE B44- MMP/Hacker 10.5/6900 Castle
IP 5000/50 SMC 5200/40/50
Casino Kid is offline   Reply With Quote
Old 02-28-2012, 10:15 AM   #504
Tech Fanatic
User Unrelated's Avatar
Join Date: Jan 2011
Posts: 954
Trader Rating: 61 (100%+)

Anyone know what other rotors besodes the "hacker" brand I could use in my E40?
I know this is an old thread, but someone might know!
I bought the motor used, and I think the rotor is bent.
I've been racing with it, and it can still pull with the shiny new Tekins and Novaks, but it's just god-awful loud!
Even spinning it by hand it makes an aweful racket.
It doesn't help that I'm running 32P gears on my 2WD Slash either haha

But while I have money, I'd like to get a replacement rotor, I really like this motor!

And what's the diameter make a difference in? Speed?, torque? I have no idea.

I've tried installing the rotor from my Ballistic, but it's too long.
"Let's go racing" I said.
User Unrelated is offline   Reply With Quote

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hacker Brushless 17.5 and 13.5 motors for sale Bertetto R/C Items: For Sale/Trade 1 08-19-2008 03:43 PM
13.5/17.5 Brushless motors - Hacker, Losi, Full Throttle BBSpence R/C Items: For Sale/Trade 6 08-13-2008 09:19 AM
--Hacker brushless motors! For E-Revo or large scale! pb4ugo R/C Items: For Sale/Trade 7 07-21-2008 05:26 PM
X-Ray 008 US, Much More, Hacker and Orion Brushless Motors RBLove R/C Items: For Sale/Trade 13 05-06-2008 05:27 PM
Hacker Brushless Motors GundamWZero Electric On-Road 5 08-11-2004 03:21 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

All times are GMT -7. It is currently 06:26 AM.

Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0