wog....supraman

iTrader: (3)

heyas,

just curious as to what the "factory" lowest turn brushed motor is??

I did a bit of searching and the lowest i have found is the Team Orion 6T double!!!.....any1 know what sort of power/rpms this motor creates (standard)

thanxs

wog

AdrianM

iTrader: (4)

Trinity sold a 5x1 mod a few years ago. It was pretty useless. That got close to the point where the motor would barely work. It spun fast, drew a ton of amps and was impossible to use on the track.

6 turns were rarely used as they were inefficient so run time was a problem and had poor driveability. You would need to get them very low to make time and then you would get a lot of wheel spin exiting corners. This made the cars handle bad. They also would spin so fast they would throw winds pretty regularly.

7 turns were the standard motor before the BL revolution in all 6 and 5 cell mod classes. In 6 cell even 7 turns would throw winds all the time.

Now its 3.5 BL with 5 cell and 4.5BL with 6 cell or Lipo.

trailranger

Didint trinity have a 5T or 4T Cobalt drag motor? Black Can, Rare Earth Magnets

fathead

Fantom do a 4x1 & 5x1 motor.

Jam-ehz

iTrader: (6)

Barry Baker used a 4x1 in a qualifier for Fastcats' Canadian Challenge..

Desolas

iTrader: (2)

We'll wind anything you want.

We still sell a good number of 6x1's, but 7x1 is more typical.