CRC 1/10 Pan Car
#1081
Joost.
#1082
McKune Chassis
ordered 2 yesterday, but have not recieved a comformation that the order was recieved.
When ordering it went direct to Paypal and got the address from there (I assume) as there was no where on site to leave an address.
Hoping the order arrives soon as my club now want to run a GT1 class for 1s 10.5 cars, so i am planning to run a GT1 spec along side my GT2 spec (2s 17.5).
OOPS!!!
Should of looked further down my emails. The confirmation is there ... lol
ordered 2 yesterday, but have not recieved a comformation that the order was recieved.
When ordering it went direct to Paypal and got the address from there (I assume) as there was no where on site to leave an address.
Hoping the order arrives soon as my club now want to run a GT1 class for 1s 10.5 cars, so i am planning to run a GT1 spec along side my GT2 spec (2s 17.5).
OOPS!!!
Should of looked further down my emails. The confirmation is there ... lol
#1083
Tech Elite
iTrader: (12)
Has Troy modified the chassis so the lower arms mount directly to the chassis? Mine isn't that way.
I think he's saying he would prefer to have the chassis with the mounting holes in it; ie, widened in the front to eliminate the plate with the three mounting positions for wheelbase length.
I think he's saying he would prefer to have the chassis with the mounting holes in it; ie, widened in the front to eliminate the plate with the three mounting positions for wheelbase length.
#1085
Tech Elite
iTrader: (12)
i guess that is the easy answer, but even still i check mine all the time and it is occasionally tweaked out of square.. shimming the axles a few hundredths at the wheel is more than enough adjustment most of us need and it would be 4 less screws and two less carbon pieces.. make no mistake i completely understand the design choice as when this car was planned there were practically no rules. they were hedging their bet so to speak with the layout and it's flexability, but now that the class's rules have been sorted, the car can certainly be streamlined .... and lightened..
#1086
Not happy with the delivery service from McKune
Ordered on the 19th, still not arrived.
YET ....
Nexus order placed on the 26th arrived today
Ordered on the 19th, still not arrived.
YET ....
Nexus order placed on the 26th arrived today
#1087
Tech Master
iTrader: (51)
Mckune Design 1s Lipo Chassis
I am Sorry for the inconvenience. I shipped out your 2 chassis the same day you ordered them on 1/19/2010 via USPS Priority Global. You should have received an email with tracking information. I have resent the tracking info and shipping to your email address.
I checked tracking this morning and it says they are hung up in customs:
- Into Foreign Customs, January 27, 2010, 11:58 am, GREAT BRITAIN
- Arrived Abroad, January 27, 2010, 11:47 am, GREAT BRITAIN
- International Dispatch, January 22, 2010, 1:27 am, ISC SAN FRANCISCO (USPS)
- Arrival
- Electronic Shipping Info Received, January 20, 2010
I will continue to check on this until it is delivered. If something ever happens in anyone's order I will make it right.
If anyone orders a chassis from me and has a problem please contact me at:
Mckune Design, LLC
(360) 891-0484
visit my website for information or my email address.
and one more thing:
Congratulations to Dave Ehrlich and Brian Bodine for making the A Main in World GT at Snowbirds. Both drivers were running a Mckune Design Chassis. Dave ending up finishing 8th overall and Brian finished 7th. Also, I will have some pictures up soon of the rear pod plates with engraved and paint filled names. I made them for all of the top CRC drivers and I guess they were a hit.
Thanks,
Troy
Last edited by Troy Mckune; 02-03-2010 at 05:18 PM.
#1089
Hi Troy,
Please post when the new rear brace is available so I can place a complete order.
Many thanks.
Bill
Please post when the new rear brace is available so I can place a complete order.
Many thanks.
Bill
#1090
Not sounding good.
Last time something got held in Customs from America it took 2 months to deliver, then they not only charged me the price of the goods, they added a holding fee, so ended up costing me 3½ times the original price
Last time something got held in Customs from America it took 2 months to deliver, then they not only charged me the price of the goods, they added a holding fee, so ended up costing me 3½ times the original price
#1092
Has anyone run the McKune chassis outdoors yet?
cos that is where mine will be running, with a 10.5
cos that is where mine will be running, with a 10.5
#1094
#1095
Tech Addict
CRC GenX10s finish 1,2,3 in 2009 / 2010 SouthWestern Ontario ShootOut Championship Series!
1st Tie - Lou Vanderwey CRC Corvette SCAR 17.5
1st Tie - Wayne Vince World GT 10.5 Pro
3rd - John Elliot CRC Honda NSX SCAR 17.5
The Four Race Series took place at 4 different Ontario Canada Tracks. Two of the races were Cancer Memorial Fund Raisers
1/ Karl Mackie Memorial Race Against Cancer - Sarnia Ontario
2/ Lou's Speedway - London Ontario
3/ Action Hobbies - Kingsville Ontario
4/ FastCats' John Posthumus Memorial Race
The SCAR Class uses the Novak 17.5 SS Brushless Motor, Orion 2400 LIPO Battery, HPI SPORTS Car Body, 1,000 Gram Minimum Weight.
1st Tie - Lou Vanderwey CRC Corvette SCAR 17.5
1st Tie - Wayne Vince World GT 10.5 Pro
3rd - John Elliot CRC Honda NSX SCAR 17.5
The Four Race Series took place at 4 different Ontario Canada Tracks. Two of the races were Cancer Memorial Fund Raisers
1/ Karl Mackie Memorial Race Against Cancer - Sarnia Ontario
2/ Lou's Speedway - London Ontario
3/ Action Hobbies - Kingsville Ontario
4/ FastCats' John Posthumus Memorial Race
The SCAR Class uses the Novak 17.5 SS Brushless Motor, Orion 2400 LIPO Battery, HPI SPORTS Car Body, 1,000 Gram Minimum Weight.