Buckaroo

iTrader: (3)

Yes, it uses the wheel bearings in a special adapter, so you're good to go. Excellent tool, well worth the money.

wingman2

Hi guys,

Can anyone tell me if you get the rear brace that has CRC in it instead of the standard 'X' brace in the Gen X10 LE kit please?

Many thanks,

Chris.

Still Bill

iTrader: (16)

The "Rear CRC Pod Brace - B/L pods" does come in the LE kit. It is also available from CRC as Part Number 17741.

Because it is not on their website yet, I e-mailed John to have it included in my order.

[email protected]

Bill

Atcom

iTrader: (1)

What is the best way to set/change your ride height? All help is appreciated!

mackin

iTrader: (4)

Shims for the front and ride height adapters for the rear. Both available from CRC. Also tire diam. Small tires are the way to go.

chuck

joeymdz

iTrader: (13)

and if your looking for 1 off braces you can get the Mckune personalized brace instead

mine says (Shake N' Bake)

ozzy-crawl

iTrader: (14)

anyone know were in Australia i can get tyres from,found the local importer
and seeing if my lhs can get them from them but not sure on stock.
worst thing about living in Aus is unless its common its really hard to get and usually 2-3 times the price

Still Bill

iTrader: (16)

If your sources in AUS cannot take care of you, try A-Main Hobbies in California USA. It's owner, Kendall Bennet, is Australian...

Cheers!

Bill

johnnywhopper

17741 has been on the website for some time now.

http://www.teamcrc.com/crc/modules.p...prodID=7719165

still no pic yet, but it is there!

Still Bill

iTrader: (16)

Oops! My bad! I could not find it in the Graphite parts listings.

Thanks John.

Bill

johnnywhopper

no problem.

littlealex

iTrader: (86)

what servo do you guys use on gen x le?
how much torque i will need for steering?

Still Bill

iTrader: (16)

JR3650 or KO951PDS.

Both are high quality and provide the torque needed for either 1S or 2S setups.

Bill

Still Bill

iTrader: (16)

For those that don't know...Johnnywhopper is actually John Firsching of CRC's Customer Support in Rome, NY. John is a great resource for all things CRC and can be reached via e-mail at [email protected].

Bill

littlealex

iTrader: (86)

getting back to 1/10 pan car for outdoor.
anyone have good starting setup for crc gen x LE 2s 13.5 boosted?
what size of tires, spur and roll out is good for 90-100 feet size track?