2008 Roar onroad carpet nats
02-28-2008, 03:31 PM
#542
Bob - if you are running stock - 27T brushed or 17.5 brushless.
Super Stock more your game? 19T brushed or down to a 10.5 brushless.
Modified? well, that's an open game...
regardless.... rules haven't changed... check the ROAR motor approval lists. If your choice is there, your good to go.. if its not.. .well, we have a problem...
02-28-2008, 03:33 PM
#544
02-28-2008, 04:12 PM
#546
Ok, David has been emailed... hopefully this can get all squared away
Steve - thanks... and yep, that would cause a huge headache. I believe that was the description and listing that has been on the list since 2005. We just created a new list for Brushless separated from brushed and moved over the exact listings and descriptions as has been in place. Mostly because I got tired of reading all the motors to find what I wanted...LOL
If the description has changed, please send an email to David Lee, [email protected] , so we can make that change if applicable and per the rules. (Or have Bob send it.)
Thanks for the heads up....
If the description has changed, please send an email to David Lee, [email protected] , so we can make that change if applicable and per the rules. (Or have Bob send it.)
Thanks for the heads up....
02-28-2008, 04:45 PM
#547
At the risk of showing what a complete noob I am when it comes to rug races, I must ask the following question.
What width will pass tech, for foam sedan tires? I have Jaco PP on Prizm's and they all measure about 29.3 mm wide. Do most people true them down in width? If so what width, 26mm, 28mm?
Help a rug noob would ya?!?
What width will pass tech, for foam sedan tires? I have Jaco PP on Prizm's and they all measure about 29.3 mm wide. Do most people true them down in width? If so what width, 26mm, 28mm?
Help a rug noob would ya?!?
02-28-2008, 08:30 PM
#550
here is the lineup so far:
Touring Stock
Juan Aveytia
Anthony Ballard
Todd Beardmore
Brian Bernt
Dave Bertetto
Stephen Boice
TJ BRADLEY
Adam Brigden
Aaron Bruner
Tony Clem
Sean Cochran
Tim Copp
Bob Cross
Robert Dirla
E.J. Evans
Eli Ezrow
Erik Ferjancic
Mario Ficco
Mike Garrett
Steve Grubb
Chris Hensley
Jim Hildebrandt
michael huddleson
BRAD JOHNSON
Donald Johnson
Brian Jucha
Gary Katzer
Brent Klingforth
Kenny Lambert
Tyler Lynn
Mike McBride
Jim McGee
Marc 'McGoo' McGurren
Timothy Moore
TJ Moore
Mike Mowery
Paul Ohlsen
Timothy Pandiscio
rick pfeilsticker
Allan Pfromm
Conner Pfromm
Brian Post
Dale Post
Arthur Scrimo
darren shank
Randy Sides
Todd Sieler
Lance Simon
Mike Soltau
Bob Stellflue
Larry Stone
Bill Sydor
Craig Xavier
**of course this is not official just what I got off the site.
Touring Stock
Juan Aveytia
Anthony Ballard
Todd Beardmore
Brian Bernt
Dave Bertetto
Stephen Boice
TJ BRADLEY
Adam Brigden
Aaron Bruner
Tony Clem
Sean Cochran
Tim Copp
Bob Cross
Robert Dirla
E.J. Evans
Eli Ezrow
Erik Ferjancic
Mario Ficco
Mike Garrett
Steve Grubb
Chris Hensley
Jim Hildebrandt
michael huddleson
BRAD JOHNSON
Donald Johnson
Brian Jucha
Gary Katzer
Brent Klingforth
Kenny Lambert
Tyler Lynn
Mike McBride
Jim McGee
Marc 'McGoo' McGurren
Timothy Moore
TJ Moore
Mike Mowery
Paul Ohlsen
Timothy Pandiscio
rick pfeilsticker
Allan Pfromm
Conner Pfromm
Brian Post
Dale Post
Arthur Scrimo
darren shank
Randy Sides
Todd Sieler
Lance Simon
Mike Soltau
Bob Stellflue
Larry Stone
Bill Sydor
Craig Xavier
**of course this is not official just what I got off the site.
02-28-2008, 08:53 PM
#551
Is the Novak 13mm Sintered Tuning Rotor going to be legal for the 13.5 Rubber TC class at the Carpet Nats?
02-28-2008, 10:08 PM
#552
Tech Regular
According to the 13.5T superstock rules the rotor has to be within 12.20mm-12.51mm so I would imagine the 13mm rotor will not be legal for the 13.5 class.
02-28-2008, 10:29 PM
#553
02-29-2008, 06:39 AM
#554
12.4.1 Only ROAR-approved electric motors, batteries and bodies may be used in National Championship events. Motors, batteries, and bodies must have been listed on
www.roarracing.com fourteen (14) days prior to the event to be eligible for use.
