R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 01-10-2011, 04:56 PM   #14176
Tech Elite
 
hairy's Avatar
 
Join Date: Apr 2008
Location: In the Good ole' U.S.A.
Posts: 2,323
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by hanzo3 View Post
Picked up a M-05 pro and put in a Savox 1251 servo in it. I have traction roll with this car on our local carpet track (TQ Raceway). I feel like during a turn, the car is only on 3 wheels like it is rocking back and forth. Is this due to a fast servo? I am running sweep 28 premounts.
I don't have traction roll problems on carpet with my MO5.I run the ride height to the point that the suspension arms are flat or level all the way across,front and rear. I run a hard front tire and med in the rear,50wt oil up front and 60wt in the rear. I run the blue springs up front and red on the rear. this set up works on both asphalt and carpet.What I have found is that with this set up I don't need traction compound on the tires at all. But that my set up it may not work for someone else.
__________________
MERLIN RACING
"He once ran a marathon because it was on his way"
Logic is a lost art!
You are defined in life by how you respond to defeat!
hairy is offline   Reply With Quote
Old 01-10-2011, 05:21 PM   #14177
Tech Regular
 
Mr_Gleeman's Avatar
 
Join Date: Mar 2009
Location: Melbourne, Australia
Posts: 262
Trader Rating: 16 (100%+)
Default

Quote:
Originally Posted by hanzo3 View Post
Picked up a M-05 pro and put in a Savox 1251 servo in it. I have traction roll with this car on our local carpet track (TQ Raceway). I feel like during a turn, the car is only on 3 wheels like it is rocking back and forth. Is this due to a fast servo? I am running sweep 28 premounts.
I run indoor and I will make a few suggestions that also might help.

1. Add weight to your car at the front, lead shot behind the bumper helps; 1350kg is a typical weight for my cars.
2. Try lowering your ride hide at the front and slightly higher at the rear with yellow springs at the rear blue at the front.
3. I run a higher weight damper oil for indoor but start off around 50W and play with it from there.

Try doing small changes at a time and note the characteristics or the "feel" of the car from there.

John
__________________
www.tamiyarcmini.com ..............Check out my new web page

"Remember when all else fails stick to the gunuine Tamiya parts because you could of saved heaps!"
Mr_Gleeman is offline   Reply With Quote
Old 01-10-2011, 05:24 PM   #14178
Tech Master
 
I)arkness's Avatar
 
Join Date: Jul 2006
Location: Victoria,Aus
Posts: 1,104
Trader Rating: 7 (100%+)
Default

Quote:
Originally Posted by Mr_Gleeman View Post
1350kg is a typical weight for my cars.
im sure if it weighed that much it wouldnt traction roll
__________________
B.Portelli
Hyper RC - Metro Hobbies - RAB Hobbies - Wild Turbo Fans
Off road - Schumacher - R1Wurks Australia (Coupon Code - R1BP5%)
On road - Race Opt - Team Powers
I)arkness is offline   Reply With Quote
Old 01-10-2011, 05:32 PM   #14179
Tech Regular
 
Mr_Gleeman's Avatar
 
Join Date: Mar 2009
Location: Melbourne, Australia
Posts: 262
Trader Rating: 16 (100%+)
Default

Yes Brad, you anticipated well and it aint going nowhere she's rock solid!

Infact the other handy hint is better traction up front as well
__________________
www.tamiyarcmini.com ..............Check out my new web page

"Remember when all else fails stick to the gunuine Tamiya parts because you could of saved heaps!"
Mr_Gleeman is offline   Reply With Quote
Old 01-10-2011, 06:18 PM   #14180
Tech Fanatic
 
cementsurfer86's Avatar
 
Join Date: Nov 2009
Location: B-town, WA
Posts: 822
Default

What works best on the M-05 as far as diff's go???
Ball diff or a gear diff that's been shimmed?

This would apply to a Tarmac setup, thanks!!!!
__________________
Jesse Anderson / JROY386 / R_
theRACERunderground - "Budget Champions"
www.theracerunderground.blogspot.com
cementsurfer86 is offline   Reply With Quote
Old 01-10-2011, 06:26 PM   #14181
Tech Champion
 
Core Creations's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2001
Location: Back in the booth
Posts: 5,629
Trader Rating: 91 (100%+)
Send a message via AIM to Core Creations
Default

I always ran my M05L @1250g and it never traction rolled on carpet no matter how hard I threw it into the corner. And thats without swaybars as they weren't available last year. I'd start by making sure your low enough in the front. I usually run it about 3.5mm at the center up front and about 4.5mm rear. The glue on the sidewall will work...but you need to experiment with the amount of glue. A lot will sometimes take away too much steering. Id also use 40 wt oil f & r with short yellows up front and short blues out back.
__________________
Core Creations paint thread

Mini Mafia Kansas Chapter - where the monster minis grow!
Core Creations is offline   Reply With Quote
Old 01-10-2011, 07:23 PM   #14182
Tech Fanatic
 
subaru73's Avatar
 
Join Date: Jul 2005
Location: Auburn
Posts: 884
Trader Rating: 41 (100%+)
Default m05

Quote:
Originally Posted by cementsurfer86 View Post
What works best on the M-05 as far as diff's go???
Ball diff or a gear diff that's been shimmed?

This would apply to a Tarmac setup, thanks!!!!
hello i run both put i perfer the ta03 ball diff also do not use balldiff grease for the diff balls use anti wear grease and make shure the diff is tight.
__________________
Tamiya 419 Tamiya evo5 ms,Tamiya Ta05r Tamiya FF04 rm01 Tamiya Ff03R
Ko proppo K.I.Y radio lrp speed control
Cfx paint works Fantom Racing Ko Proppo apex Rc tq hobbies acer racing Hebki design works
subaru73 is offline   Reply With Quote
Old 01-10-2011, 08:13 PM   #14183
Tech Elite
 
caltek1's Avatar
 
Join Date: Mar 2007
Posts: 3,354
Trader Rating: 33 (100%+)
Default

Quote:
Picked up a M-05 pro and put in a Savox 1251 servo in it. I have traction roll with this car on our local carpet track (TQ Raceway). I feel like during a turn, the car is only on 3 wheels like it is rocking back and forth. Is this due to a fast servo? I am running sweep 28 premounts.
hanzo3,

I am unsure of your driving style, but with the mini you need to be smooth, otherwise the car will traction roll. I also notice that you are using sweep 28's that are pre mounted, I know they make 25's, 33's and 40's but not 28's, must be another grade of tyre we do not get in Oz, however they may be part of your issue.

Have you tried other tyres or are they the gun type of tyres at your track. I would ask one of the fast guy's at the track for some tips and ask for assistance from him. They should be able to assits with some ideas. The Ca tip does work, however I have never tried it on a 55mm diameter tyre before. I think most people use it on the Tamiya M grip, Standard Kit tyre and S grip, so the side wall has less flex.

Ride height is the critical component on a mini when racing on carpet and using a tyre that will work on this surface. I have seen that Express mini tyres work well on the rear and HPI M grip fronts are good. This combination does not require the side walls to be glued as they are stiff. The use of a stiffer rim is advisable also, as the sweeps are mounted on a very flexible rim which may also be causing the issue. A stiff rim like Yeah Racing or the Tamiya Swift rim would be a better option. On asphelt or concrete surface the sweep rim would be better with a firmer fitted insert, depending on which end of the car it is fitted.

All of the information that has been offered is sound advice from experienced racers. As mentioned change one thing at a time and see if the handling changes. The extra weight works in Oz as with the BL system we have more grunt out of the corners and want more traction.

BTW

When I run on carpet, the only change I make to the car is the tyres and drop the ride height if I use 60mm Tamiya tyres. Everything else stays the same. If I use the 55mm tyre then ride height is already set.

Good luck with your racing.

Later,

Calvin.

Last edited by caltek1; 01-11-2011 at 12:01 AM. Reason: revised text
caltek1 is offline   Reply With Quote
Old 01-10-2011, 10:51 PM   #14184
Tech Champion
 
monkeyracing's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2008
Location: SnowMexico
Posts: 5,836
Trader Rating: 10 (100%+)
Default

The CA glue thing for carpet really only applies to the outside row of tread on the tire. Applying to the sidewall isn't necessary as the it won't roll under if the outside row of tread block is glued and allowed to slide a little.

How have you got your steering set? I ran my M-03 at 55-65% on sticky carpet. Made things a lot easier.
__________________
Stab it and steer.

Last edited by monkeyracing; 01-11-2011 at 07:55 AM.
monkeyracing is offline   Reply With Quote
Old 01-10-2011, 10:55 PM   #14185
Tech Master
 
hanzo3's Avatar
 
Join Date: Aug 2007
Location: Anaheim Hills, CA
Posts: 1,293
Trader Rating: 55 (100%+)
Default

I was using 28's sweeps. Thanks for the tips guys. 55-65% of servo travel?
__________________
Chris TRF419 TA05V2
TQ RC Racing Powered by teeth
hanzo3 is offline   Reply With Quote
Old 01-11-2011, 02:41 AM   #14186
Tech Elite
 
sosidge's Avatar
 
Join Date: Dec 2001
Location: Bristol, UK
Posts: 3,811
Default

Quote:
Originally Posted by hanzo3 View Post
I was using 28's sweeps. Thanks for the tips guys. 55-65% of servo travel?
In that case you must be running normal touring tyres on the car, because Sweep don't make a 28 for mini. 25, 33 & 40 only.

It's really interesting reading all the different opinions on Mini handling, some of which are complete opposites of one another and complete opposites of my experience!

One thing that is certain is that nothing stops grip-roll like glueing the front sidewall.
sosidge is offline   Reply With Quote
Old 01-11-2011, 03:43 AM   #14187
Tech Fanatic
 
SirSwiftAlot's Avatar
 
Join Date: Jul 2007
Location: SOCAL the fastest mini cooper guys in the nation
Posts: 859
Trader Rating: 11 (100%+)
Default

Quote:
Originally Posted by sosidge View Post
In that case you must be running normal touring tyres on the car, because Sweep don't make a 28 for mini. 25, 33 & 40 only.

It's really interesting reading all the different opinions on Mini handling, some of which are complete opposites of one another and complete opposites of my experience!

One thing that is certain is that nothing stops grip-roll like glueing the front sidewall.
No you guys have to realize that you can set up a mini based upon tire handout rules. try going really heavy weight oil in the front with 2 hole piston and 3 hole in the rear with 40 weight sway bar in the rear and ride height about 4 mm all the way around
__________________
Why do people park in a driveway but then drive in a parkway?
SirSwiftAlot is offline   Reply With Quote
Old 01-11-2011, 04:52 AM   #14188
Tech Regular
 
Tim K's Avatar
 
Join Date: Aug 2003
Posts: 287
Default

Quote:
Originally Posted by sosidge View Post

It's really interesting reading all the different opinions on Mini handling, some of which are complete opposites of one another and complete opposites of my experience!
sosidge - you're correct, the amount of different setups for a mini is astounding! And as for opposites, a few years ago I was running red springs all around, on TRF touring car shocks with 5+mm of droop with 80wt oil.
Now I run the shorter TRF mini shocks (no droop), super hard springs at the front and super soft at the rear with 40wt oil ... I'd say that's about the complete opposite

As for traction roll, throw more weight in the car, some minis get around fine weighing 1500 grams, try running wider hexes on the rear - 6mm and then 4mm on the front. Sway bar on the rear. Turn the amount of steering down, I get by with 70%.
Also try being smoother on the steering wheel, throwing full lock into the steering wheel every corner won't help ... and even braking before a corner and then powering through it can stop the traction roll.
Tim K is offline   Reply With Quote
Old 01-11-2011, 06:18 PM   #14189
Tech Fanatic
 
cementsurfer86's Avatar
 
Join Date: Nov 2009
Location: B-town, WA
Posts: 822
Default

Quote:
Originally Posted by subaru73 View Post
hello i run both put i perfer the ta03 ball diff also do not use balldiff grease for the diff balls use anti wear grease and make shure the diff is tight.
Thanks Sub! good advice.
__________________
Jesse Anderson / JROY386 / R_
theRACERunderground - "Budget Champions"
www.theracerunderground.blogspot.com
cementsurfer86 is offline   Reply With Quote
Old 01-11-2011, 09:01 PM   #14190
Tech Master
 
hprt's Avatar
 
Join Date: Jun 2004
Location: Airdrie, Alberta
Posts: 1,714
Trader Rating: 9 (100%+)
Default

Quote:
Originally Posted by monkeyracing View Post
The CA glue thing for carpet really only applies to the outside row of tread on the tire. Applying to the sidewall isn't necessary as the it won't roll under if the outside row of tread block is glued and allowed to slide a little.

How have you got your steering set? I ran my M-03 at 55-65% on sticky carpet. Made things a lot easier.
putting the CA on the outer row of tread blocks, on the contact patch, effectively makes the tire more narrow and reduces front end grip. Maybe our carpet is super grippy, but in the last races of the night, after the track has fully grooved in, practically everyone in our club has to resort to the CA trick - even when using M04s/M05's running 55mm tires and 4mm clearance. Glue application is a finesse thing, as previously mentioned. Too much CA and the sidewall is too stiff, resulting in a loss of steering. I tried forever to get my M05 and M04 to avoid traction rolls by suspension settings and harder tires, but ultimately the CA trick done right proves to be the fastest in lap times for me.
__________________
Cheers,
Scott W

Vice President, KARZ.ca
WCICS Rep - Karz RC Club
hprt is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tamiya Mini Cooper M-03L Hop-ups mini71 R/C Items: Wanted to Buy 4 05-04-2016 11:07 AM
Tamiya Mini Cooper mach51 R/C Items: Wanted to Buy 10 09-02-2011 12:08 AM
FS:TAMIYA Mini Cooper, TA 04S rthmotorsports R/C Items: For Sale/Trade 4 10-20-2007 09:37 PM
Tamiya 415 MSX and M03 Mini Cooper F/S Racer X79 R/C Items: For Sale/Trade 14 12-22-2006 07:38 AM
Tamiya M01,02,03, or 04 Mini Cooper ccugolf.com R/C Items: Wanted to Buy 2 12-05-2004 08:55 PM


Tags
m03, m03r ules, m05, mini, tamiya


Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
miha
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 06:45 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0