Tamiya mini cooper
#691
Originally Posted by qwerty
what sort of transponder? a amb pt? or a club transponder?
the club loaner transponder uses a body clip thru the body...
the ambrc can fit in the chasis with double sided tape,
or on the rear left hand side of the chassis there is 2 spare screws where you can screw it in (but this position lays the PT sideways, and i had problems with the Transpoder picking up the signal, when the loop was above the car)
the club loaner transponder uses a body clip thru the body...
the ambrc can fit in the chasis with double sided tape,
or on the rear left hand side of the chassis there is 2 spare screws where you can screw it in (but this position lays the PT sideways, and i had problems with the Transpoder picking up the signal, when the loop was above the car)
#692
Originally Posted by Wicked-Wayz
I use the big & medium plastic clip that came with my cva shocks. Which in size is I think about 6mm. Set it low enough so your front arms are level. When there level it will keep the front from binding. I have very little time right now until monday. If I get some good free time before then I will measure mine. What I told you is pretty much my guess for what they are.
Peace Aaron(W-W)
Peace Aaron(W-W)
thanks.
#693
Tech Regular
Originally Posted by Edgarski
club transpoder
drill a hole about 5mm wide, on the front windscreen, and use a body clip
#694
i see...thanks mate.
#695
Tech Regular
click post reply -> scroll down and see "manage attatchements"
#696
got it..thanks..
is there a reason why clip the trsnpoder on the front window ?
is there a reason why clip the trsnpoder on the front window ?
#697
Tech Regular
Originally Posted by Edgarski
Sorry I don't get which is the plactic clip you were referring at. I attached a pic of CVA shock set...just when you have the chance man...
thanks.
thanks.
#698
Tech Regular
Originally Posted by Edgarski
got it..thanks..
is there a reason why clip the trsnpoder on the front window ?
is there a reason why clip the trsnpoder on the front window ?
#699
got it ..thanks a lot
#700
Hey thanks guys. Anyone here race mini at Fredrick or RCO cause I've heard something about a group of guys wanting to race thier minis together.
#701
Tech Master
Tires
Question for you mini guys. Just getting into mini's and was wondering what tire options are available. I would like to keep everything to "scale", meaning not using touring car tires. Thanks in advance.
#702
Tech Adept
iTrader: (1)
Originally Posted by lotus1
Hey can any of you guys tell me if the TAo3 front hub carriers(steering blocks) will interchange with the TL cars.Specifically the mini cooper.Thanks,Mario.
#703
Originally Posted by qwerty
they are shock spacers... they should come with the tree with the original shocks... they are a "C" shaped and slide between the spring and the shock cap around the shock body.... add some "pre-load"
#704
Tech Regular
Originally Posted by Edgarski
thanks man..i'm still confused because my original query is i will use my Aluminum TA04-R TRF threaded damper and opinions on using it....do i still need to use those 'c' clips as preload?
if they are threaded u dont need to use the spacers... well u may want to use the spacers to measure out 2mm or 3mm or 4mm
#705
Tech Regular
Originally Posted by KO PROPO Staff
Question for you mini guys. Just getting into mini's and was wondering what tire options are available. I would like to keep everything to "scale", meaning not using touring car tires. Thanks in advance.
only tires that say m-chassis, there are only 5 kinds u can get from tamiya
and the two more from hpi aswell.