BadPanda818

iTrader: (19)

This is my 06. I had it for about a year now and couldn't complain on it. I've installed o rings underneath the thumb screws to get a little flex on dusty tracks and feels like it's on rails

BadPanda818

iTrader: (19)

Kind of a crazy question referring to ifs suspension. Does increasing the height of the ball connector that holds the upper part of the damper do anything? Thanks

sosidge

I see that the TA06 MS is on the shelves in HK now... anyone going to take a punt on one?

TB03Racer09

iTrader: (1)

For a good price too, $300USD! Looks like Tamiya has an answer to the cheaper double deck touring cars like the 3Racing Sakura and Spec-R R1.

I would get one if I didn't just buy a TA06 Pro with Rsector Conversion kit.

Arsenal2012

iTrader: (7)

Thats the way to go!

bigb11

iTrader: (59)

I thought the MS was better than PRO????

Arsenal2012

iTrader: (7)

It has some optional parts that are better/included. I meant that at 80$ for the rsector chassis which does not require u to unscrew the bottom battery holder it is probably better to get the pro and rsector chassis. Relatively same price as MS....

SpoonEK

Hi guys! I just got a TA06 pro kit. I am totally a noob in rc car and I really need some help in the setting up my first car. How much droop, camber and toe should I start with?

redzone

iTrader: (4)

Kit settings maybe?

Arsenal2012

iTrader: (7)

Im having a problem fitting a motor in my TA06.
Other then cutting up the chassis what is everyone else doing, spacers, other plates.
PLMK, pics would be nice or part numbers.

Thanks

TB03Racer09

iTrader: (1)

some motors just won't fit without a hassle unfortunately.

I am going to use a Speed Passion Competition V3.0 17.5T motor. The wire tab thingies are on the rear of the can (same side as the sensor wire). No way they can get in the way.

Arsenal2012

iTrader: (7)

Please can anyone tell me which Xenon spurs fit perfectly onto the ta06!

Is it:
PERFECT SPUR GEAR in 48/64
PR Spur Gear in 48/64
VSS TC 64P SPUR GEAR
VSS DD 64P SPUR GEAR

A response is appreciated.

Thank you,

zaraz

iTrader: (38)

anybody get the new ms kit, was oping for some updates

SpoonEK

Anyone using the Nanotech A-spec 6200mah lipo on the stock chassis? The measurement of the lipo taken from their website seems to be a tight fit in the battery compartment.

canon

sir any suggestion for my ta06 pro set up, i will be running on 17.5 blinky with my orion r10 pro on indoor asphalt...what wt of oil for my differentials and shocks, and gears should i use?