shrink warp
#1
shrink warp
is there a site where i can look to see how to shrink warp batteries
#3
ummmm, a video...on how 2 shrink wrap....mmmkay......easy way....is as follows
1. slide the shrink wrap over the exposed area, which is to be covered.
2. Grab your heating device, in my case its a soldering iron..
3. Touch the soldering iron on the shrink wrap and slowly make your way up the length of the shrink wrap.
4. Turn the wire over and repeat...
tada!!
beautiful!!
i dont think a video is needed...but if it is sum uber cool, sleek way of doing it, go 4 it!
hope this helps ya mate
wog
1. slide the shrink wrap over the exposed area, which is to be covered.
2. Grab your heating device, in my case its a soldering iron..
3. Touch the soldering iron on the shrink wrap and slowly make your way up the length of the shrink wrap.
4. Turn the wire over and repeat...
tada!!
beautiful!!
i dont think a video is needed...but if it is sum uber cool, sleek way of doing it, go 4 it!
hope this helps ya mate
wog
#5
Id substitute the soldering iron for your wife's, mom's or sisters hairdryer but its simple enough to do.