WHICH BRAND AND MODEL OF E.S.C.
#2
I am a fan of the Novak GTX. It is small and has no motor limit at all. I never had a problem with any of the three that I own.
#6
#7
Tech Apprentice
iTrader: (2)
The new Tekin's are really good, The B1(R) is good for micro. The B1 is good for stock 1/12th, then you get into the FX series ESC's for the TC. There are all really small, low internal resistance, highly adjustable in there settings. In the near future the ESC's from teken are going to able to be programmed from your computer, the new ESC's are all ready for it they are just waiting to finish the controll software I beleive.
#8
COMPARISONS
GUYS BY THE WAY ARE ALL THESE ESC LIPO COMPATIBLE??? ITS NOT INDICATED IN THE SPECIFICATIONS EXCEPT FOR THE QC3
The VFS Series C2 (Competition 2)
Key Features
• Control method: Changeable control
• The maximum peak current:3120A (FET specs.)
• Continuous, maximum current: 780A (FET specs.)
• Accessory: Ultimate Shotki Diode Single, Ultimate Condenser, 12 GA
• Size: 28.0x25.0x14.4.4mm (size of case)
• 18.8g in weight (The silicon wire excluded)
• Proper power-supply voltage: 4.8-8.4V (4-7 cells)
• Drive frequency: 0.9-12KHz (64 steps)
• Output voltage for receiver: 6V (input 7.2v)
• Output current for receiver: 2A (maximum peak)
VFS-2
Programmable drive frequency at a budget price with full competition.
• Control method: Changeable control
• The maximum peak current:1440A (FET specs.)
• Continuous, maximum current: 360A (FET specs.)
• Accessory: Ultimate Shotki Diode Single, Ultimate Condenser, 15 GA
• Size: 28.0x25.0x14.4.4mm (size of case)
• 18.7g in weight (The silicon wire excluded)
• Proper power-supply voltage: 4.8-8.4V (4-7 cells)
• Drive frequency: 0.9-12KHz (64 steps) initialization 4.0kHz
• Output voltage for receiver: 6V (input 7.2v)
• Output current for receiver: 2A (maximum peak)
HARA TWISTER 2.2
Specification
Maximum Electric Current: 3120A (FET Spec)
Continuing Electric Current: 780A (FET Spec)
Unlimited Motor Turns
Input Voltage: 4.8-8.4V
Drive Frequency: T2.2 Exclusive Atsushi Hara Program (Factory Set)
Category: All EP
Size: 28.0 x 25.0 x 14.4mm
Weight: 18.8g (Main Body Only)
Silicone Code, Ultimate Schottky Diode, Ultimate Capacitor Included
Quantum Competition 3
Rec. Motor Limit- over 5 turns
Voltage Input- 4-7 cells (4.8-8.4V)
Rated Current- 360A
BEC- 6.0V/3.5A
PWM Frequency- Reactive
Start Automatic- yes
Adjustment- Ni-MH-Li-Po, Power Profiles, Initial-Brake, Auto-Brake
DEMS-3 (Digital Engine Mapping System 2)- yes
The VFS Series C2 (Competition 2)
Key Features
• Control method: Changeable control
• The maximum peak current:3120A (FET specs.)
• Continuous, maximum current: 780A (FET specs.)
• Accessory: Ultimate Shotki Diode Single, Ultimate Condenser, 12 GA
• Size: 28.0x25.0x14.4.4mm (size of case)
• 18.8g in weight (The silicon wire excluded)
• Proper power-supply voltage: 4.8-8.4V (4-7 cells)
• Drive frequency: 0.9-12KHz (64 steps)
• Output voltage for receiver: 6V (input 7.2v)
• Output current for receiver: 2A (maximum peak)
VFS-2
Programmable drive frequency at a budget price with full competition.
• Control method: Changeable control
• The maximum peak current:1440A (FET specs.)
• Continuous, maximum current: 360A (FET specs.)
• Accessory: Ultimate Shotki Diode Single, Ultimate Condenser, 15 GA
• Size: 28.0x25.0x14.4.4mm (size of case)
• 18.7g in weight (The silicon wire excluded)
• Proper power-supply voltage: 4.8-8.4V (4-7 cells)
• Drive frequency: 0.9-12KHz (64 steps) initialization 4.0kHz
• Output voltage for receiver: 6V (input 7.2v)
• Output current for receiver: 2A (maximum peak)
HARA TWISTER 2.2
Specification
Maximum Electric Current: 3120A (FET Spec)
Continuing Electric Current: 780A (FET Spec)
Unlimited Motor Turns
Input Voltage: 4.8-8.4V
Drive Frequency: T2.2 Exclusive Atsushi Hara Program (Factory Set)
Category: All EP
Size: 28.0 x 25.0 x 14.4mm
Weight: 18.8g (Main Body Only)
Silicone Code, Ultimate Schottky Diode, Ultimate Capacitor Included
Quantum Competition 3
Rec. Motor Limit- over 5 turns
Voltage Input- 4-7 cells (4.8-8.4V)
Rated Current- 360A
BEC- 6.0V/3.5A
PWM Frequency- Reactive
Start Automatic- yes
Adjustment- Ni-MH-Li-Po, Power Profiles, Initial-Brake, Auto-Brake
DEMS-3 (Digital Engine Mapping System 2)- yes
#9
What about MRT's latest, I believe distributed in the US by EAMotorsports;
MRT R9953
NEW ESC World Best MOSFET Specification
MX TSX - Gold Connector Version
Advanced Digital Electronic Speed Controller
No Motor Limit - 1440A / 0.000162 Ohms
Forward/Brake. Full 100% Water/Dust Protection.
Size:24x24x14mm Weight (no wires):20g approx.
18 Power Profiles (6 Low, 6 Med, 6 High Power)
Plus unique new Dual-Active 'VDF' Variable Drive.
Low, Mid and High Frequency Ranges, fixed and
variable frequency profiles from 900Hz to 5KHz.
12 brake programs (Brake Min/Max). Launch Control.
Drag Brakes, Auto-Roll. NiMH and LiPo settings.
6V 3A Rx Supply Output, Supply Priority/Protection.
Comes supplied with Extras Pack inc 14G Wire,
Schottky Diode, Power Cap, Gold Plugs etc.
P.S. NO NEED TO SHOUT
MRT R9953
NEW ESC World Best MOSFET Specification
MX TSX - Gold Connector Version
Advanced Digital Electronic Speed Controller
No Motor Limit - 1440A / 0.000162 Ohms
Forward/Brake. Full 100% Water/Dust Protection.
Size:24x24x14mm Weight (no wires):20g approx.
18 Power Profiles (6 Low, 6 Med, 6 High Power)
Plus unique new Dual-Active 'VDF' Variable Drive.
Low, Mid and High Frequency Ranges, fixed and
variable frequency profiles from 900Hz to 5KHz.
12 brake programs (Brake Min/Max). Launch Control.
Drag Brakes, Auto-Roll. NiMH and LiPo settings.
6V 3A Rx Supply Output, Supply Priority/Protection.
Comes supplied with Extras Pack inc 14G Wire,
Schottky Diode, Power Cap, Gold Plugs etc.
P.S. NO NEED TO SHOUT
#10
Tech Master
Wait for the kopropo VFS-1 competition 3 to come out before you decide!
#11
Tech Master
iTrader: (14)
What about the Tekin speedo? I haven't used this one yet, but I am very happy with the G-11 pro that I am running in my car now.
http://www.teamtekin.com/fx.html
http://www.teamtekin.com/fx.html
#13
#14
TEKIN !!!!