drift ELECTRIc rc car THE CHEAPEST WAY
 

the cheapest and easiest way to drift a rc car?
wannt to kno?
well im here to tell youu

first thngs u need are Duck tape, siccors, rc car obvisly, Ruler

thngs to do.

1.get the duck tape and measure ur tire width and mark it on the tape.
2.mark a line going down the tape as long as ur need.
3.stick the tape on the back of ur tires onlyy(dont want it spinning out)
4.turn it on and get ready to DIRFTT!

ive also made a video if u didnt understand the stepss
heres the link

http://www.youtube.com/watch?v=PigC1GDWQ-g

if you tried it post a comment and tell me what u thnk of it ?

this is a relative cheap way of making your car dirft....


but on taped tires cars are unstable
the tape doesnt last long and shreds meaning you car will gain grip very quickly


abs or pvc are still the only way to drift properly.

yes i kno they will shred very easy.
i was just saying IF you dont have the money and just want to have a bit of funn with ur car this is the way too goo.
but the best places to drift without the tape ripping is
tiles or timber floors like i have.

If money is a issue then why waste time and money on tape.
Just go down to local gardening shop and see if they have DPE irrigation pipe.
It has teh same ID as a rim OD, you just cut it with a hacksaw and file it down to width you need or if you go past a machine shop you can ask if they wont mind turning a couple out for you on a lathe.
The DPE is softer than PVC and is a nice balance between no grip and too much grip.
Its black too so looks like tyres.