01-16-2004, 09:03 AM
Join Date: Aug 2001
Location: NorCal. Napa area
Originally posted by racer
Kingcrab & RC-zombies,
since both of you i know have the HB graphite bumper brace.
did any one have problems installing it?
i have tried installed the stock plastic pegs on to the graphite brace. and when trying to install the pegs on to the lower bumper frame, it does not align properly. my pegs are slightly bent.
anything we can do to fix this?
any help would be appreciated.
I was able to install the stock aluminum stand-offs for the graphite bumper brace.... the alignment is off about 1mm... you have the option of forcefitting it in...or elongate the hole on the graphite brace inward....
and btw... 55mm body post are too short..
60 and 65mm will fit most bodies.
HB WCE HARA EDITION CYCLONE: LRP Sphere TC, KO 2363 digital servo.
HB HARA EDITION PRO4: Gone to a new home..
Last edited by rc-zombies; 01-16-2004 at 09:26 AM.