Hpi Pro 4

You're on Page 62 of 1071
Go to
  • Re: Re: bumper
    Quote:
    Originally posted by dr_hfuhuhurr
    You should always use protection.
    most definately...alway use protection to help those pre-mature breakage....
  • you can see HPI japan website R&D cafe have many pro 4 tips !!!
  • Quote:
    Originally posted by LeoChan
    you can see HPI japan website R&D cafe have many pro 4 tips !!!
    Read all the tips already...printed them out for reference. The only thing I have to get is the thicker aluminum Hex Hubs. I guess the stock ones are fine if you're racing with a narrow set-up...but for wide set-up...they're finding problems with it.
  • please see before tips !
    gear easy broke !!
  • uhhh its in japanese
  • Quote:
    Originally posted by lawndoggie
    uhhh its in japanese
    use Babelfish to translate

    http://babelfish.altavista.com/
  • I e-mail RC champ about getting one but they never got back to me.
  • Quote:
    Originally posted by pucho
    I e-mail RC champ about getting one but they never got back to me.
    I gave up on them...

    I got a great deal on Ebay... $450.00 for a Pro4 and LRP Q2 combo.

    And I got a Hara Twister coming soon too... now I'm debating which speedo to keep.... I will sell one of them....
  • the Q2 works pretty good.
  • Cool Pro 4 Pix
    I found pretty cool new pics of the pro 4 and hara on http://www.rcworld.ch
  • Quote:
    Originally posted by pucho
    I e-mail RC champ about getting one but they never got back to me.
    I've ordered a lot of parts there + a Pro4 for a friend...no answer too
    Perhaps they don't want to deal with foreigners anymore
  • Pro 4 gear box fitting
    hi all pro 4 owners/thad g/erik s/kingcrab,
    i just fitted the lower half of the front gear box onto the chassis last night, and placed the top half onto it to trial fit. i saw that the gearbox joints are not a good fit, the top half does not sit flat, only the fr + rear edges are touching the bottom half's surface, the centre portion is slightly curved upwards.
    i've not yet install any gear box internals at this present moment, so is this suppose to be like that? or is my kit's graphited gearboxes out of shape? do any of you pro 4 owners come across this problem?
    any solutions will be appreciated
  • yes Pro 4 gear box not fit !
    lower gear box no good !
  • the lower & upper gear box left & right side have a big gap !!
  • Re: Pro 4 gear box fitting
    Quote:
    Originally posted by alana07
    hi all pro 4 owners/thad g/erik s/kingcrab,
    i just fitted the lower half of the front gear box onto the chassis last night, and placed the top half onto it to trial fit. i saw that the gearbox joints are not a good fit, the top half does not sit flat, only the fr + rear edges are touching the bottom half's surface, the centre portion is slightly curved upwards.
    i've not yet install any gear box internals at this present moment, so is this suppose to be like that? or is my kit's graphited gearboxes out of shape? do any of you pro 4 owners come across this problem?
    any solutions will be appreciated

    I think you will have no issue once you screw the thing together. My car had no such issue.