Hpi Pro 4
#5251
...
Last edited by Erik Shauver; 09-12-2006 at 10:33 AM.
#5254
Barger....I have emailed you!
#5255
Spur Gears
Precision Racing Systems, Enough Said. Excellent spur gears and pinions. Use to think RW Spurs were awesome till I ran these, now there is no comparison. PRS all the way!
Later,
Later,
#5256
Tech Elite
Re: Re: Toe Blocks
Originally posted by rc-zombies
Tower has them instock...
Tower has them instock...
Between Tower and Horrizon I found a full set of the blocks (minus the 0.5 block).
Thanks,
Steven
#5258
Tech Elite
Re: Re: Re: Re: Toe Blocks
Originally posted by rc-zombies
cool.... but I don't think a 0.5 block is available or I may have missed it... where did you see it at?
cool.... but I don't think a 0.5 block is available or I may have missed it... where did you see it at?
I will have the full set sometime next week and this should give me more tuning options to dial the car in for my driving style. Still waiting on the spacer plates that go under the block though. Hopefully soon.
Thanks,
Steven
#5259
Regional Moderator
iTrader: (9)
Re: Spur Gears
Originally posted by CRASH
Precision Racing Systems, Enough Said. Excellent spur gears and pinions. Use to think RW Spurs were awesome till I ran these, now there is no comparison. PRS all the way!
Later,
Precision Racing Systems, Enough Said. Excellent spur gears and pinions. Use to think RW Spurs were awesome till I ran these, now there is no comparison. PRS all the way!
Later,
#5260
cvd problem
PROBLEM!
i was running 19t today and i rubbed up against a board and i bent s cvd. has anyone had any cvd problem??? if so left me know what you did to keep this from happening...
thanks lazyboy
i was running 19t today and i rubbed up against a board and i bent s cvd. has anyone had any cvd problem??? if so left me know what you did to keep this from happening...
thanks lazyboy
#5262
Tech Elite
iTrader: (1)
Re: cvd problem
Originally posted by lazyboy
PROBLEM!
i was running 19t today and i rubbed up against a board and i bent s cvd. has anyone had any cvd problem??? if so left me know what you did to keep this from happening...
thanks lazyboy
PROBLEM!
i was running 19t today and i rubbed up against a board and i bent s cvd. has anyone had any cvd problem??? if so left me know what you did to keep this from happening...
thanks lazyboy
#5263
preston, I bent tweaked a CVD - I still ran it though, it wasnt to bad.
#5264
Bent CVD
Hey, i was running modified out here in San Anotnio and i have been racing for about four or five year and am a aldus design team driver(just needed to provide info. , this is my first post) i have probably had not to many hard hits and last weekend i smaked the wall and that one hit caused it to bend so you arent the only one.
p.s. the tc3's cvd's are the exact same thing if you need a quick replacement:
p.s. the tc3's cvd's are the exact same thing if you need a quick replacement:
#5265
Tech Elite
Re: Re: cvd problem
Originally posted by AWOLsoldier
other than not hitting anything you'll probably have to go with a stainless steel cvd. aluminum is too weak for cvds if you ask me.
other than not hitting anything you'll probably have to go with a stainless steel cvd. aluminum is too weak for cvds if you ask me.
Aluminum CVD's usually wallow out the pin holes in the bones pretty quickly compared to their Steel counterparts. This is the tradeoff if you want less rotating mass in your drive-train.