05-07-2004, 12:49 PM
Join Date: Mar 2002
Location: Norfolk, VA
Originally posted by popsracer
My RX is mounted flat on it's back, with 1 piece of servo tape. I tried raising the Receiver at the track and didn't notice any difference at all. The Antenna is at least 1/4" to 3/8" away from any Chassis Graphite.
The ESC and RX are about 1/8" apart, with more space between the RX and servo. I guess I could relocate the RX forward closer to the servo.
Someone at the track suggested mounting the ESC on several pieces of servo tape. Never had to do this before, so I will have to try this too.
My Pro-3 with the exact same Monster Stock has been glitch free.
I had the same problems, so I mounted my receiver on top of my servo and the problem vanished. Since the receiver is so small it did not have an ill effects.