blueskieshlg

Help,

Just upgraded my steering servo to a KO PDS 2344 6v and now have really bad glitches with it when plugged into a specktrum reciever. My PT is now also not working, the little orange led flickers with the servo is moving. Does anyone know why this is.

My old KO PDS 2123 7.2v worked fine using this set up so i know my KO esprit 3 universe transmitter and LRP Q2 speedo work .

Im running a 1/10 electric powered xray t2 007

Whats the differance between a 6v and 7.2v servo and is this the problem

Thanks in advance

ChrisP

iTrader: (11)

Try adding a capacitor to your receiver..

The BEC output on the Q2 is quite low...this is a known issue with the QC2 and shows itself often when used along with digital servos.