1. Turn the power switch to the ON position on the Transmitter.
The DSSS Module LED will turn on after 6 seconds.
2. Depress and hold the DSSS Receiver Binding button.
3. Turn the power switch to the ON position in the DSSS Receiver and continue holding the Binding button.
The DSSS Receiver LED will flash slowly.
4. Release the Binding button on the DSSS Receiver after 2 seconds.
5. Depress and hold the Binding button on the transmitter until the LED on the DSSS Receiver flashes rapidly
6. Binding is now complete. Both DSSS module and Receiver