Tamiya TRF416 / TRF416WE / TRF416X
#2552
Tech Rookie
416 direct cup
Do this direct delrin cups fit on the 416 spool in the 416:
http://rc-mushroom.com/product_info....ducts_id=14623
Tamiya TRF415/416 Direct Cup
[TA-9804268]
Thanks,
Joffrey
http://rc-mushroom.com/product_info....ducts_id=14623
Tamiya TRF415/416 Direct Cup
[TA-9804268]
Thanks,
Joffrey
#2553
Do this direct delrin cups fit on the 416 spool in the 416:
http://rc-mushroom.com/product_info....ducts_id=14623
Tamiya TRF415/416 Direct Cup
[TA-9804268]
Thanks,
Joffrey
http://rc-mushroom.com/product_info....ducts_id=14623
Tamiya TRF415/416 Direct Cup
[TA-9804268]
Thanks,
Joffrey
#2554
Do this direct delrin cups fit on the 416 spool in the 416:
http://rc-mushroom.com/product_info....ducts_id=14623
Tamiya TRF415/416 Direct Cup
[TA-9804268]
Thanks,
Joffrey
http://rc-mushroom.com/product_info....ducts_id=14623
Tamiya TRF415/416 Direct Cup
[TA-9804268]
Thanks,
Joffrey
#2555
Tech Fanatic
Do this direct delrin cups fit on the 416 spool in the 416:
http://rc-mushroom.com/product_info....ducts_id=14623
Tamiya TRF415/416 Direct Cup
[TA-9804268]
Thanks,
Joffrey
http://rc-mushroom.com/product_info....ducts_id=14623
Tamiya TRF415/416 Direct Cup
[TA-9804268]
Thanks,
Joffrey
#2556
Are the factory 0 degree rear uprights available yet?
#2558
#2559
Tech Lord
iTrader: (32)
Ya know...
This car could do no wrong on the carpet. And that's a good thing, since I'm planning to get whipped in Vegas next month. But man, since I moved to a part of the country where asphalt reigns supreme in the summer... I've struggled. Some of it is learning how to drive on a different surface, no doubt. But, the car has been a LOT less forgiving overall on the tarmac. My struggles continue. :-( I removed the center screw on the top deck, and that seemed to help. I started with Victor's Reedy setup, and have changed a lot since then.
Speaking of Vegas, if any of you plan to attend, lets chat. A non-team group of 416 drivers could be a good resource at a race with no parts from the on-site hobby shop.
This car could do no wrong on the carpet. And that's a good thing, since I'm planning to get whipped in Vegas next month. But man, since I moved to a part of the country where asphalt reigns supreme in the summer... I've struggled. Some of it is learning how to drive on a different surface, no doubt. But, the car has been a LOT less forgiving overall on the tarmac. My struggles continue. :-( I removed the center screw on the top deck, and that seemed to help. I started with Victor's Reedy setup, and have changed a lot since then.
Speaking of Vegas, if any of you plan to attend, lets chat. A non-team group of 416 drivers could be a good resource at a race with no parts from the on-site hobby shop.
#2560
Tech Champion
iTrader: (34)
Ya know...
This car could do no wrong on the carpet. And that's a good thing, since I'm planning to get whipped in Vegas next month. But man, since I moved to a part of the country where asphalt reigns supreme in the summer... I've struggled. Some of it is learning how to drive on a different surface, no doubt. But, the car has been a LOT less forgiving overall on the tarmac. My struggles continue. :-( I removed the center screw on the top deck, and that seemed to help. I started with Victor's Reedy setup, and have changed a lot since then.
Speaking of Vegas, if any of you plan to attend, lets chat. A non-team group of 416 drivers could be a good resource at a race with no parts from the on-site hobby shop.
This car could do no wrong on the carpet. And that's a good thing, since I'm planning to get whipped in Vegas next month. But man, since I moved to a part of the country where asphalt reigns supreme in the summer... I've struggled. Some of it is learning how to drive on a different surface, no doubt. But, the car has been a LOT less forgiving overall on the tarmac. My struggles continue. :-( I removed the center screw on the top deck, and that seemed to help. I started with Victor's Reedy setup, and have changed a lot since then.
Speaking of Vegas, if any of you plan to attend, lets chat. A non-team group of 416 drivers could be a good resource at a race with no parts from the on-site hobby shop.
#2562
Tech Apprentice
rebound....!!!!
Hi guys, please help...i understand all the set up info on the setup sheets except 1 thing...what is meant by REBOUND ? i get all the droop stuff but the rebound i not sure what im looking at...help please..
#2565
Tech Adept
Short lesson about rebound.
Shock rebound is the amount that the shock shaft rebounds back when fully pushed in. The percent is of the full travel of the shock. I use 50 percent and it works great for me
I think at ED can light more this...